Home › Drivetrain › JF2A (TRANSFER / 4WD / AWD) › 4WD CONTROL SWITCH(w/o Entry and Start System) › from 2015.08
RM2660E _52 Drivetrain _052810 JF2A TRANSFER / 4WD / AWD _0255340 4WD CONTROL SWITCH(w/o Entry and Start System) G

JF2A TRANSFER / 4WD / AWD  4WD CONTROL SWITCH(w/o Entry and Start System)  INSPECTION  


PROCEDURE

Hide 84223A 1.INSPECT TRANSFER POSITION SWITCH

a.
C172380E02
0.041,0.051 0.248,0.233 0.207,0.182 10 *a 0.447,0.936 0.811,1.096 0.364,0.160 10 2WD 2.607,0.936 3.064,1.131 0.457,0.195 10 GND2 1.637,1.586 1.004,1.017 1.004,1.017 0.889,1.017 false 1.833,1.586 2.467,1.017 2.467,1.017 2.581,1.017 false

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (2WD) - 4 (GND2) H4 Position 10 kΩ or higher
L4 Position Below 1 Ω


Text in Illustration
*a Component without harness connected
(Transfer Position Switch)

If the result is not as specified, replace the transfer position switch.