Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT DRIVE SHAFT ASSEMBLY
RM2660E _52 Drivetrain _052811 DRIVE SHAFT / PROPELLER SHAFT _0255343 FRONT DRIVE SHAFT ASSEMBLY G

DRIVE SHAFT / PROPELLER SHAFT  FRONT DRIVE SHAFT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 43420 1.INSPECT FRONT DRIVE SHAFT ASSEMBLY

NOTICE:

Move the drive shaft while keeping it level.


a.
C175123

Check if there is excessive play in the outboard joint.


b.

Check if the inboard joint shaft slides smoothly in the thrust direction.


c.

Check if there is excessive play in the radial direction of the inboard joint shaft.


d.

Check the boots for damage.


e.
C175125

Check that the 2 boots are not stretched or contracted when the drive shaft is at standard length.

Standard drive shaft length:

583 mm (1.91 ft.)


If the boots are stretched or contracted, correct them.