Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY
RM2660E _52 Drivetrain _052811 DRIVE SHAFT / PROPELLER SHAFT _0255347 PROPELLER SHAFT ASSEMBLY A

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 37110 1.INSTALL REAR PROPELLER SHAFT

a.
C172481E04
1.802,1.365 2.24,1.823 2.24,1.823 2.333,1.823 true 2.375,1.75 3.427,2.167 1.052,0.417 10 true Matchmark

Align the matchmarks on the propeller shaft flange and transfer.


b.

Connect the propeller shaft with the 4 washers and 4 nuts.

Torque:
88 N*m (900 kgf*cm, 65 ft.*lbf)


c.
C178527E09
1.198,1.281 1.104,1.385 1.104,1.385 1,1.385 false 1.26,1.281 1.167,1.708 1.167,1.708 1.063,1.708 false 2.25,1.177 1.583,0.219 1.583,0.219 1.344,0.219 true 0.719,1.313 1.01,1.5 0.292,0.188 10 false Bolt 0.563,1.625 1.104,1.813 0.542,0.188 10 false Washer 0.583,0.156 1.354,0.656 0.771,0.5 10 true Matchmark

Align the matchmarks on the propeller shaft flange and rear differential.


d.

Install the propeller shaft with the 4 bolts, 4 washers and 4 nuts.

Torque:
88 N*m (900 kgf*cm, 65 ft.*lbf)


Hide 36336 2.INSTALL TRANSFER HEAT INSULATOR

a.
C171487

Install the insulator with the 4 bolts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)