Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR DIFFERENTIAL CARRIER ASSEMBLY(for LSD)
RM2660E _52 Drivetrain _052812 AXLE AND DIFFERENTIAL _0255354 REAR DIFFERENTIAL CARRIER ASSEMBLY(for LSD) A

AXLE AND DIFFERENTIAL  REAR DIFFERENTIAL CARRIER ASSEMBLY(for LSD)  REMOVAL  


PROCEDURE

Hide 2.REMOVE REAR AXLE SHAFT

a.

Hide 37110 3.DISCONNECT PROPELLER SHAFT ASSEMBLY

a.
C172482E07
1.479,1.25 1.115,1.667 1.115,1.667 1.01,1.667 true 0.125,1.594 1.021,1.865 0.896,0.271 10 true Matchmark

Place matchmarks on the rear propeller shaft and companion flange.


b.

Remove the 4 nuts, 4 washers and 4 bolts, and disconnect the propeller shaft from the differential side.


c.

Support the propeller shaft securely.


Hide 41101 4.REMOVE REAR DIFFERENTIAL CARRIER SUB-ASSEMBLY

a.
C174037

Remove the 10 nuts, 10 washers and differential carrier.

NOTICE:

Be careful not to damage the contact surfaces of the differential carrier and rear axle housing.



b.

Remove the gasket.