Home › Drivetrain › AXLE AND DIFFERENTIAL › FRONT DIFFERENTIAL CARRIER ASSEMBLY
RM2660E _52 Drivetrain _052812 AXLE AND DIFFERENTIAL _0255357 FRONT DIFFERENTIAL CARRIER ASSEMBLY A

AXLE AND DIFFERENTIAL  FRONT DIFFERENTIAL CARRIER ASSEMBLY  DISASSEMBLY  


PROCEDURE

Hide 41321 1.REMOVE DIFFERENTIAL EXTENSION FLANGE TUBE

a.
C171952

Remove the 4 bolts.


b.

Using a plastic-faced hammer, remove the differential tube.


Hide 41304P 2.REMOVE DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL

a.
C159259E02
1.522,1.238 1.945,0.74 1.945,0.74 2.127,0.74 false 2.195,0.666 2.735,0.897 0.540,0.231 10 SST

Using SST, tap out the oil seal.

SST
09308-00010  


Hide 41204E 3.REMOVE FRONT DRIVE PINION COMPANION FLANGE FRONT NUT

a.
C159261E03
1.708,1.281 2.167,1.01 2.167,1.01 2.344,1.01 true 2.385,0.938 2.698,1.094 0.313,0.156 10 false SST

Using SST and a hammer, unstake the nut.

SST
09930-00010  


b.
C159262E02
2.791,0.769 2.691,0.769 2.691,0.769 2.518,0.991 false 2.832,0.686 3.172,0.853 0.341,0.167 10 SST

Using SST to hold the companion flange, remove the nut.

SST
09330-00021  (09330-00030)


Hide 41204D 4.REMOVE FRONT DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY

a.
C358635E01
1.125,0.427 1.302,0.427 1.302,0.427 1.479,0.625 false 0.813,0.354 1.271,0.552 0.458,0.198 10 false SST

Using SST, remove the companion flange from the differential carrier.

SST
09950-30012  (09951-03010, 09953-03010, 09954-03010, 09955-03030, 09956-03020)


Hide 41101D 5.REMOVE FRONT DIFFERENTIAL CARRIER OIL SEAL

a.
C159264E02
1.439,0.804 1.177,0.665 1.177,0.665 1.039,0.665 false 0.666,0.574 0.995,0.748 0.330,0.173 10 SST

Using SST, remove the oil seal.

SST
09308-10010  


Hide 41214C 6.REMOVE FRONT DIFFERENTIAL DRIVE PINION OIL SLINGER

Hide 41141L 7.REMOVE FRONT DIFFERENTIAL CROSS SHAFT BEARING RETAINER

a.
C160133E01
2.303,0.58 2.441,0.750 0.139,0.170 10 A 1.4,0.626 1.539,0.795 0.139,0.170 10 A 0.919,0.767 1.058,0.937 0.139,0.170 10 A 0.524,0.918 0.662,1.088 0.139,0.170 10 A 2.909,1.068 3.047,1.238 0.139,0.170 10 A 3.012,1.569 3.150,1.739 0.139,0.170 10 A 1.389,2.706 1.528,2.876 0.139,0.170 10 A 1.018,2.442 1.156,2.612 0.139,0.170 10 A 0.832,2.235 0.970,2.405 0.139,0.170 10 A 0.623,2.067 0.761,2.237 0.139,0.170 10 A 0.142,1.907 0.281,2.076 0.139,0.170 10 A 2.976,1.927 3.229,2.096 0.253,0.170 10 B 2.71,2.704 2.963,2.874 0.253,0.170 10 B 2.311,2.775 2.564,2.944 0.253,0.170 10 B

Remove the bolts labeled B and front differential front support assembly LH.


b.

Remove the bolts labeled A.


c.

Using a plastic-faced hammer, tap out the bearing retainer.


Hide 41301L 8.REMOVE FRONT NO. 1 DIFFERENTIAL CASE SUB-ASSEMBLY

a.

Remove the differential case from the differential carrier.


Hide 9.REMOVE DIFFERENTIAL DRIVE PINION

a.
C159434E05
0.938,2.396 1.063,2.906 1.063,2.906 0.885,2.906 false 0.469,2.823 1.052,2.969 0.583,0.146 10 false Block

Set the differential carrier to an overhaul stand as shown in the illustration.


b.

Using a press, press out the drive pinion.

NOTICE:

Do not drop the drive pinion.



Hide 41211B 10.REMOVE FRONT DRIVE PINION FRONT RADIAL BALL BEARING

a.

Remove the bearing (inner race) from the differential carrier.


Hide 41183C 11.REMOVE FRONT DIFFERENTIAL BREATHER PLUG OIL DEFLECTOR

a.
C159446

Remove the 2 bolts and oil deflector.


Hide 41110V 12.REMOVE FRONT DIFFERENTIAL UNION

a.
C159447

Remove the front differential union from the differential carrier.


Hide 41211A 13.REMOVE FRONT DRIVE PINION REAR TAPERED ROLLER BEARING

a.
C116049E01
0.155,0.116 0.487,0.276 0.332,0.161 10 SST 0.545,0.202 0.817,0.202 false 0.817,0.202 0.817,1.011 false

Using SST and a press, press out the bearing (inner race) from the drive pinion.

SST
09950-00020  

If the drive pinion or ring gear is damaged, replace them as a set.


Hide 41211A 14.REMOVE FRONT DRIVE PINION REAR TAPERED ROLLER BEARING

a.
C159337

Using a brass bar and hammer, tap out the bearing (outer race) and washer.


Hide 41211B 15.REMOVE FRONT DRIVE PINION FRONT RADIAL BALL BEARING

a.
C159338E03
0.979,1.021 1.375,1.438 true 1.5,1.292 1.25,1.021 1.25,1.021 0.719,1.021 true 0.365,0.948 0.698,1.104 0.333,0.156 10 false SST

Using SST and a hammer, tap out the bearing (outer race) from the differential carrier.

SST
09950-70010  (09951-07100)
09950-60010  (09951-00450)
09950-60020  (09951-00710, 09952-06010)


Hide 41311A 16.REMOVE FRONT DIFFERENTIAL CASE BEARING

HINT:
·

Measure the plate washer and note its thickness.

·

Tag the bearing outer races to show the location for reassembly.



a.
U156095E02
1.479,1 1.167,0.635 1.167,0.635 0.844,0.635 false 2.427,0.74 2.229,0.146 2.229,0.146 2,0.146 true 0.948,0.635 1.375,1.125 false 0.521,0.583 0.823,0.75 0.302,0.167 10 false SST 1.094,0.063 2.01,0.229 0.917,0.167 10 false Plate Washer

Using SST and a press, press out the bearing (outer race) and plate washer from the bearing retainer.

SST
09950-60020  (09951-00680)
09950-70010  (09951-07150)


b.
C159267E05
0.813,0.531 1.219,0.99 true 1.323,0.771 1.094,0.531 1.094,0.531 0.656,0.531 true 2.438,0.854 2.219,1.75 2.219,1.75 2.281,1.75 true 0.354,0.458 0.698,0.615 0.344,0.156 10 false SST 2.344,1.677 3.219,1.833 0.875,0.156 10 false Plate Washer

Using SST and a press, press out the bearing (outer race) and plate washer from the differential carrier.

SST
09950-60020  (09951-00680)
09950-70010  (09951-07150)


Hide 17.REMOVE DIFFERENTIAL RING GEAR

a.
U156091E03
2.01,1.417 2.167,1.75 2.167,1.75 2.208,1.75 true 2.26,1.677 3.031,1.844 0.771,0.167 10 false Matchmark

Place matchmarks on the ring gear and differential case.


b.

Remove the 12 bolts.


c.

Using a plastic-faced hammer, tap on the ring gear to disconnect it from the differential case.


Hide 41311A 18.REMOVE FRONT DIFFERENTIAL CASE BEARING

a.
U156092E01
1.753,0.574 1.407,1.328 false 1.349,0.817 1.481,0.574 1.481,0.574 1.85,0.574 false 1.902,0.485 2.327,0.644 0.425,0.160 10 SST

Using SST, remove the 2 bearings (inner race).

SST
09950-60010  (09951-00390)
09950-40011  (09951-04020, 09952-04010, 09953-04030, 09954-04010, 09955-04061, 09957-04010, 09958-04011)

HINT:

Fix the claws of SST into the notch in the differential case assembly.



Hide 19.DISASSEMBLE DIFFERENTIAL CASE

a.
C159245E05
2.698,0.969 2.333,0.458 2.333,0.458 2.052,0.458 true 1.292,0.375 2.094,0.573 0.802,0.198 10 false Straight Pin

Using a pin punch and hammer, tap out the straight pin.


b.

Remove these parts from the differential case assembly.

i.

2 differential side gears


ii.

2 differential side gear thrust washers


iii.

Differential pinion shaft


iv.

2 differential pinion gears


v.

2 differential pinion gear thrust washers



Hide 41039A 20.INSPECT DIFFERENTIAL GEAR KIT

a.

Check that there is no damage to the pinion gears and side gears.

If a pinion gear and/or side gear is damaged, replace the differential gear kit.


Hide 41301L 21.INSPECT FRONT NO. 1 DIFFERENTIAL CASE SUB-ASSEMBLY

a.

Check that the differential case is not damaged.

If the differential case is damaged, replace it.


Hide 41304P 22.REMOVE DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL

a.
R013199E09
1.625,1.708 1.781,1.708 false 1.865,1.625 2.156,1.802 0.292,0.177 10 false SST

Using SST, tap out the oil seal from the flange tube.

SST
09308-00010  


Hide 41304F 23.REMOVE DIFFERENTIAL SIDE GEAR SHAFT SUB-ASSEMBLY RH

a.
C159248

Using a snap ring pliers, remove the snap ring.


b.
C171953

Using a plastic-faced hammer, tap out the side gear shaft.


Hide 41304L 24.REMOVE FRONT DIFFERENTIAL SIDE GEAR SHAFT RH BEARING

a.
C171954

Using a snap ring expander, remove the snap ring.


b.
C159250E03
0.957,0.353 1.324,0.969 false 1.614,0.747 1.343,0.353 1.343,0.353 0.742,0.353 false 0.361,0.266 0.680,0.422 0.319,0.156 10 SST 1.166,0.352 1.524,0.888 false

Using SST and a press, press out the bearing.

SST
09950-00020  
09950-70010  (09951-07100)
09950-60010  (09951-00450)

NOTICE:

Do not damage the bearing.



Hide 41111D 25.REMOVE FRONT DIFFERENTIAL CARRIER STRAIGHT PIN

a.
C176512

Remove the straight pins from the bearing retainer.


Hide 41320C 26.REMOVE FRONT DIFFERENTIAL TUBE STRAIGHT PIN

a.
C176513

Remove the straight pins from the bearing retainer.