Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR DIFFERENTIAL CARRIER ASSEMBLY(for Standard)
RM2660E _52 Drivetrain _052812 AXLE AND DIFFERENTIAL _0255359 REAR DIFFERENTIAL CARRIER ASSEMBLY(for Standard) A

AXLE AND DIFFERENTIAL  REAR DIFFERENTIAL CARRIER ASSEMBLY(for Standard)  INSTALLATION  


PROCEDURE

Hide 41110 1.INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY

a.

Install a new gasket.


b.
C174037

Install the differential carrier with the 10 washers and 10 nuts.

Torque:
72 N*m (734 kgf*cm, 53 ft.*lbf)


Hide 37110 2.CONNECT PROPELLER SHAFT ASSEMBLY

a.
C178527E08
1.198,1.281 1.063,1.417 1.063,1.417 0.958,1.417 false 1.281,1.281 1.188,1.708 1.188,1.708 1.073,1.708 false 2.24,1.198 1.75,0.354 1.75,0.354 1.469,0.354 true 0.771,1.333 1.021,1.49 0.25,0.156 10 false *1 0.875,1.635 1.146,1.823 0.271,0.188 10 false *2 1.229,0.271 1.406,0.656 0.177,0.385 10 true *a

Align the matchmarks on the propeller shaft flange and differential flange.

Text in Illustration
*1 Bolt
*2 Washer
*a Matchmark


b.

Connect the propeller shaft with the 4 bolts, 4 washers and 4 nuts.

Torque:
88 N*m (900 kgf*cm, 65 ft.*lbf)


Hide 3.INSTALL REAR AXLE SHAFT