Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE SHAFT
RM2660E _52 Drivetrain _052812 AXLE AND DIFFERENTIAL _0255364 REAR AXLE SHAFT A

AXLE AND DIFFERENTIAL  REAR AXLE SHAFT  DISASSEMBLY  


PROCEDURE

Hide 42312D 1.REMOVE REAR AXLE SHAFT SNAP RING

a.
C159455

Using a snap ring expander, remove the snap ring.


Hide 42312 2.REMOVE REAR AXLE SHAFT LH

a.
C159456E04
1.646,0.646 1.646,0.313 false 1.646,0.313 1.792,0.313 false 1.667,1.583 2.396,1.583 false 1.823,0.229 2.125,0.375 0.302,0.146 10 false SST 2.438,1.49 2.74,1.635 0.302,0.146 10 false SST

Using SST and a press, press out the rear axle shaft.

SST
09521-25011  
09521-60010  


b.

Remove the rear axle bearing inner retainer from the axle hub.


c.

Remove the rear axle shaft washer from the axle hub.


d.
F042797

Grind the rear axle bearing inner race surface using a grinder, then remove it with a chisel.


Hide 42450B 3.REMOVE REAR AXLE HUB AND BEARING ASSEMBLY LH

a.
C159457

Temporarily install 4 nuts to the housing bolts.

NOTICE:

Do not use any nuts removed from the vehicle, as they may be damaged.



b.

Using a hammer, remove the 4 housing bolts and rear axle hub and bearing.


c.

Remove the 4 nuts.


Hide 42441B 4.REMOVE BRAKE DRUM OIL DEFLECTOR LH

a.
C159721E03
1.76,0.49 2.365,0.49 false 2.427,0.427 2.719,0.573 0.292,0.146 10 false SST

Using SST, remove the 5 hub bolts.

SST
09650-17011  

NOTICE:
·

Do not deform the oil deflector.

·

Make sure to align the notch of SST with the flange of the oil deflector.




b.

Remove the deflector and deflector gasket from the rear axle shaft.