CHECK DTC
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG) and the tester on.
Enter the following menus: Chassis / AHC / DTC.
Read the DTCs by following the prompts on the tester screen.
Refer to the Diagnostic Trouble Code Chart for DTC information (See page Suspension>SUSPENSION CONTROL>ACTIVE HEIGHT CONTROL SUSPENSION>DIAGNOSTIC TROUBLE CODE CHART).
CLEAR DTC
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG) and the tester on.
Enter the following menus: Chassis / AHC / DTC.
Clear DTCs.