48990A
1.REMOVE HEIGHT CONTROL HOSE ASSEMBLY
Disconnect the clamp from the reservoir, then remove the 2 clips and hose.
48931A
2.REMOVE HEIGHT CONTROL CAP TO RESERVOIR HOSE
Remove the 3 clips, 2 breather plugs, and hose from the reservoir hose.
Pull the connector down to detach it and remove the hose from the reservoir tank.
82177A
3.DISCONNECT NO. 4 FRAME WIRE
Disconnect the 2 connectors, clamp and frame wire.
48970
4.REMOVE HEIGHT CONTROL COMPRESSOR BRACKET ASSEMBLY
Remove the 3 nuts and bracket from the pump and motor.
48930C
5.REMOVE HEIGHT CONTROL RESERVOIR ASSEMBLY
Using a 5 mm hexagon wrench, remove the 5 bolts and reservoir from the pump and motor.
48912A
6.REMOVE NO. 1 HEIGHT CONTROL BOLT CUSHION
Remove the 3 bolt holders and 3 bolt cushions from the pump and motor.