48912A
1.INSTALL NO. 1 HEIGHT CONTROL BOLT CUSHION
Install the 3 bolt cushions and 3 bolt holders to the pump and motor.
48930C
2.INSTALL HEIGHT CONTROL RESERVOIR ASSEMBLY
Using a 5 mm hexagon wrench, install the reservoir with the 5 bolts.
48970
3.INSTALL HEIGHT CONTROL COMPRESSOR BRACKET ASSEMBLY
Install the bracket with the 3 nuts.
82177A
4.CONNECT NO. 4 FRAME WIRE
Connect the 2 connectors, clamp and frame wire.
48931A
5.INSTALL HEIGHT CONTROL CAP TO RESERVOIR HOSE
Install the hose to the reservoir tank, and push the connector up to attach it.
Install the hose, 2 breather plugs and 3 clips to the reservoir hose.
48990A
6.INSTALL HEIGHT CONTROL HOSE ASSEMBLY
Install the hose to the reservoir and motor with the 2 clips.
Connect the clamp to the reservoir.
Check that the direction of the hose clamp is as shown in the illustration.