84010D
1.INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (SUSPENSION CONTROL SWITCH)
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 4 (LO) - 10 (E) | Down button of height control switch is pushed. | Below 1 Ω |
| Height control switch is not pushed or up button is pushed. | 10 kΩ or higher | |
| 8 (HI) - 10 (E) | Up button of height control switch is pushed. | Below 1 Ω |
| Height control switch is not pushed or down button is pushed. | 10 kΩ or higher |
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 7 (N) - 10 (E) | Height control OFF switch is pushed. | Below 1 Ω |
| Height control OFF switch is not pushed. | 10 kΩ or higher |
| *1 | Height Control Switch |
| *2 | Height Control OFF Switch |
| *a | Component without harness connected:
(Integration Control and Panel Assembly (Suspension Control Switch)) |
If the result is not as specified, replace the integration control and panel assembly (suspension control switch).