Home › Suspension › SUSPENSION CONTROL › HEIGHT CONTROL SENSOR (for Rear Side)
RM2660E _53 Suspension _052813 SUSPENSION CONTROL _0255378 HEIGHT CONTROL SENSOR(for Rear Side) G

SUSPENSION CONTROL  HEIGHT CONTROL SENSOR(for Rear Side)  INSPECTION  


PROCEDURE

Hide 89408D 1.INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

C172946E03
2.044,0.363 2.555,0.518 0.511,0.155 10 Min. LO 1.984,2.131 2.515,2.286 0.531,0.155 10 Max. HI 2.423,1.18 2.914,1.355 0.491,0.175 10 Normal 1.715,0.751 2.028,0.946 0.313,0.195 10 45° 1.685,1.413 1.998,1.608 0.313,0.195 10 45° 0.099,2.227 0.838,2.370 0.739,0.143 10 *1: for RH 0.098,2.496 0.865,2.639 0.767,0.143 10 *2: for LH 2.744,0.725 4.150,0.895 1.406,0.170 10 2 (SHRR*1, SHRL*2) 3.39,2.395 3.934,2.570 0.544,0.175 10 3 (SHG) 5.552,1.4 6.070,1.567 0.518,0.166 10 1 (SHB) 5.172,1.98 5.026,2.476 false 3.979,2.476 5.035,2.476 false 4.01,0.028 6.513,0.351 2.503,0.323 10 Component without harness connected: (Rear Height Control Sensor) 5.533,1.468 5.409,1.468 false 5.409,1.468 5.286,1.776 false 4.145,0.821 5.06,0.821 false 5.063,0.821 5.142,1.775 false

NOTICE:

Do not drop the height control sensor. If it is dropped, replace it with a new one.


a.

Connect 3 dry batteries of 1.5 V in series.


b.

Connect the positive (+) end of the batteries to terminal 1 (SHB) of the height control sensor and the negative (-) end of the batteries to terminal 3 (SHG). While slowly moving the sensor link up and down, measure the voltage between terminal 2 (SHRR*1, SHRL*2) and terminal 3 (SHG).

HINT:

*1: for RH

*2: for LH



c.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
for RH
Tester Connection Condition Specified Condition
2 (SHRR) - 3 (SHG) Max. HI Approx. 4.1 V
Normal Approx. 2.25 V
Min. LO Approx. 0.45 V

for LH
Tester Connection Condition Specified Condition
2 (SHRL) - 3 (SHG) Max. HI Approx. 4.1 V
Normal Approx. 2.25 V
Min. LO Approx. 0.45 V


NOTICE:

Do not apply a voltage of higher than 6 V.


If the result is not as specified, replace the rear height control sensor.