Home › Suspension › FRONT SUSPENSION › FRONT UPPER SUSPENSION ARM
RM2660E _53 Suspension _052815 FRONT SUSPENSION _0255384 FRONT UPPER SUSPENSION ARM A

FRONT SUSPENSION  FRONT UPPER SUSPENSION ARM  DISASSEMBLY  


PROCEDURE

Hide 48632B 1.REMOVE FRONT SUSPENSION UPPER ARM BUSH

C155990

a.

Using a hammer and chisel, strike and bend the entire flange of the upper arm bush as shown in the illustration.


b.
C178725E04
0.583,0.542 0.771,0.542 0.771,0.542 0.958,0.75 false 1.302,1.76 1.563,1.76 false 1.469,1.75 1.469,1.531 true 0.229,0.458 0.583,0.646 0.354,0.188 10 false SST 1.604,1.688 1.896,1.896 0.292,0.208 10 true SST

Using SST and a press, press out the bush.

SST
09613-26010  
09710-22021  (09710-01031)
09950-00020  

HINT:

Remove the rear side bush using the same procedure as for the front side.



Hide 43324C 2.REMOVE FRONT UPPER BALL JOINT DUST COVER LH

C158521

a.

Using a snap ring expander, remove the dust cover set ring and dust cover from the upper arm.

NOTICE:
·

Do not damage the ball joint dust cover.

·

If the ball joint dust cover is damaged, replace it.