Home › Suspension › FRONT SUSPENSION › FRONT UPPER SUSPENSION ARM
RM2660E _53 Suspension _052815 FRONT SUSPENSION _0255384 FRONT UPPER SUSPENSION ARM A

FRONT SUSPENSION  FRONT UPPER SUSPENSION ARM  REASSEMBLY  


PROCEDURE

Hide 43324C 1.INSTALL FRONT UPPER BALL JOINT DUST COVER LH

C357672E01
2.51,1.479 2.167,1.479 2.167,1.479 1.927,1.25 false 2.042,0.938 2.51,0.938 2.51,0.938 2.51,1.76 false 1.354,1.531 1.469,1.531 1.469,1.531 1.469,1.26 false 0.208,1.448 1.365,1.656 1.156,0.208 10 false MP Grease No. 2 2.104,1.802 3.26,2.01 1.156,0.208 10 false MP Grease No. 2

a.

Pack the upper arm ball joint with MP grease.

Grease capacity:

8.0 g (0.282 oz.)



b.

Apply MP grease to the locations shown in the illustration.

NOTICE:

Do not apply MP grease to the tapered or threaded parts of the ball joint.



c.

Install the dust cover to the upper arm.


d.
C158521

Using a snap ring expander, install the dust cover set ring.

NOTICE:

Make sure the set ring is securely installed in the groove.



Hide 48632B 2.INSTALL FRONT SUSPENSION UPPER ARM BUSH

C178726E01
0.068,0.681 0.439,0.858 0.371,0.177 10 SST 0.703,0.765 0.403,0.765 false

a.

Using SST and a press, press in a new bush.

SST
09710-26011  (09710-05061)

HINT:

Press in the rear side bush using the same procedure as for the front side.