Home › Suspension › FRONT SUSPENSION › FRONT LOWER SUSPENSION ARM
RM2660E _53 Suspension _052815 FRONT SUSPENSION _0255385 FRONT LOWER SUSPENSION ARM A

FRONT SUSPENSION  FRONT LOWER SUSPENSION ARM  REASSEMBLY  


PROCEDURE

Hide 48331E 1.INSTALL FRONT NO. 1 SPRING BUMPER LH

a.

Install the 2 No. 1 spring bumpers.

Torque:
31 N*m (316 kgf*cm, 23 ft.*lbf)


Hide 48655E 2.INSTALL FRONT NO. 2 LOWER ARM BUSH LH

C173481E04
1.323,2.115 1.865,2.76 1.865,2.76 1.99,2.76 false 0.458,1.333 0.813,1.333 false 1.771,4.229 1.771,3.813 false 2.885,3.896 1.771,3.813 1.771,3.813 2.885,3.385 false 0.135,1.24 0.5,1.406 0.365,0.167 10 false SST 2.031,2.688 2.396,2.854 0.365,0.167 10 false SST 0.802,4.198 2.594,4.385 1.792,0.188 10 false Bush Positioning Protrusion

a.

Using SST and a press, press in a new bush.

SST
09710-26011  (09710-05081)

NOTICE:

Press the bush while making sure the bush positioning protrusions are perpendicular to the lower arm, as shown in the illustration.



Hide 48654F 3.INSTALL FRONT NO. 1 LOWER ARM BUSH LH

C357734E01
0.406,0.99 0.646,0.99 false 0.656,2.01 0.51,2.01 0.51,2.01 0.51,0.99 false 2.646,3.115 3.25,3.115 3.25,3.115 3.25,3.885 false 3,3.885 3.26,3.885 false 0.083,0.917 0.438,1.125 0.354,0.208 10 false SST 1.917,3.021 2.646,3.229 0.729,0.208 10 false MP grease

a.

Using SST and a press, press in a new bush.

SST
09223-00010  
09612-30012  


b.

Apply MP grease to the locations shown in the illustration.

NOTICE:

Do not apply MP grease to the tapered or threaded parts of the ball joint.



Hide 48626 4.INSTALL FRONT LOWER BALL JOINT ATTACHMENT LH

a.

Install the attachment with a new nut and a new cotter pin.

Torque:
167 N*m (1703 kgf*cm, 123 ft.*lbf)

NOTICE:

If the holes for the cotter pin are not aligned, tighten the nut further up to 60°.