Home › Suspension › REAR SUSPENSION › REAR STABILIZER BAR(w/o KDSS)
RM2660E _53 Suspension _052816 REAR SUSPENSION _0255396 REAR STABILIZER BAR(w/o KDSS) A

REAR SUSPENSION  REAR STABILIZER BAR(w/o KDSS)  INSTALLATION  


PROCEDURE

Hide 48802 1.INSTALL STABILIZER LINK SUB-ASSEMBLY LH

a.
C174368

Install the stabilizer link to the stabilizer bar with the bolt and nut.

Torque:
48 N*m (489 kgf*cm, 35 ft.*lbf)


b.
C174367

Install the 2 retainers, 2 cushions and bracket with the nut.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


Hide 48802 2.INSTALL STABILIZER LINK SUB-ASSEMBLY RH

HINT:

Use the same procedures described for the LH side.


Hide 48805 3.INSTALL REAR STABILIZER BAR SUB-ASSEMBLY

a.

Install the 2 rear stabilizer bushes to the rear stabilizer bar.


b.

Install the rear stabilizer bar.


Hide 48824R 4.INSTALL REAR STABILIZER BRACKET LH

a.
C174411

Install the stabilizer bar bracket with the 2 bolts.

Torque:
56 N*m (571 kgf*cm, 41 ft.*lbf)


Hide 48824R 5.INSTALL REAR STABILIZER BRACKET RH

HINT:

Use the same procedures described for the LH side.


Hide 48825A 6.CONNECT REAR STABILIZER END BRACKET LH

a.
C173670

Connect the stabilizer end bracket with the 2 bolts.

Torque:
36 N*m (367 kgf*cm, 27 ft.*lbf)


Hide 48825A 7.CONNECT REAR STABILIZER END BRACKET RH

HINT:

Use the same procedures described for the LH side.


Hide 8.INSTALL REAR WHEEL

Torque:
for aluminum wheel : 131 N*m (1336 kgf*cm, 97 ft.*lbf)
for steel wheel : 209 N*m (2131 kgf*cm, 154 ft.*lbf)