Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › FRONT SPEED SENSOR › 2014.08–2015.08
RM2660E _54 Brake _052819 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0255406 FRONT SPEED SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  FRONT SPEED SENSOR  INSTALLATION  


PROCEDURE

Hide 89543 1.INSTALL FRONT SPEED SENSOR LH

a.
C271342

Install the speed sensor with the bolt.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)

NOTICE:
·

Make sure there are no pieces of iron or other foreign matter attached to the sensor tip.

·

While inserting the speed sensor into the knuckle hole, do not strike or damage the sensor tip.

·

After installing the speed sensor, make sure there is no clearance or foreign matter between the sensor stay part and the knuckle.

·

Make sure there is no foreign matter attached to the speed sensor rotor.




Hide 89516 2.INSTALL FRONT SKID CONTROL SENSOR WIRE LH

a.

w/o AHC:

i.
U156114

Connect the connector.


ii.

Install the harness clamp with the bolt.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)

NOTICE:
·

When installing the clamp, do not twist the wire harness.

·

Make sure the clamp rotation stopper touches the installation position.





b.

w/ AHC:

i.
U157313

Connect the 2 connectors.


ii.

Install the harness clamp with the bolt.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)

NOTICE:
·

When installing the clamp, do not twist the wire harness.

·

Make sure the clamp rotation stopper touches the installation position.





c.
C170882

Install the 2 harness clamps with the 2 bolts.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)

NOTICE:
·

When installing the clamps, do not twist the wire harness.

·

Make sure the clamp rotation stopper touches the installation position.




d.
C177132

Install the harness clamp with the nut.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)

NOTICE:
·

When installing the clamp, do not twist the wire harness.

·

Make sure the clamp rotation stopper touches the installation position.




e.
U164925E01
2.562,0.549 3.071,0.723 0.509,0.173 10 Stopper

Install the harness clamp with bolt

Torque:
except China : 13 N*m (127 kgf*cm, 9 ft.*lbf)
for China : 32 N*m (326 kgf*cm, 24 ft.*lbf)

NOTICE:

Install the bracket so that the rotation stopper touches the knuckle.



f.

Connect the speed sensor connector.

NOTICE:

Securely connect the connector.



Hide 89542 3.INSTALL FRONT SPEED SENSOR RH

a.
C271343

Install the speed sensor with the bolt.

Torque:
8.5 N*m (87 kgf*cm, 75 in.*lbf)

NOTICE:
·

Make sure there are no pieces of iron or other foreign matter attached to the sensor tip part.

·

While inserting the speed sensor into the knuckle hole, do not strike or damage the sensor tip part.

·

After installing the speed sensor, make sure there is no clearance or foreign matter between the sensor stay part and the knuckle.

·

Make sure there is no foreign matter attached to the speed sensor rotor.




Hide 89516 4.INSTALL FRONT SKID CONTROL SENSOR WIRE RH

a.

w/o AHC:

i.
C172203E01
0.044,0.708 0.161,0.851 0.117,0.143 10 A

Install the skid control sensor clamp with the bolt (labeled A).

Torque:
for bolt A : 13 N*m (127 kgf*cm, 9 ft.*lbf)


ii.

Attach the connector to the skid control sensor clamp and then connect the connector.


iii.

Install the 2 harness clamps with the 2 bolts.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)

NOTICE:
·

When installing the clamps, do not twist the wire harness.

·

Make sure the clamp rotation stopper touches the installation position.





b.

w/ AHC:

i.
C170887E01
0.056,0.699 0.173,0.847 0.117,0.147 10 A

Install the skid control sensor clamp with the bolt (labeled A).

Torque:
for bolt A : 13 N*m (127 kgf*cm, 9 ft.*lbf)


ii.

Attach the connector to the skid control sensor clamp and then connect the connector.


iii.

Install the 2 harness clamps with the 2 bolts.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)

NOTICE:
·

When installing the clamps, do not twist the wire harness.

·

Make sure the clamp rotation stopper touches the installation position.




iv.
C170888

Install the harness clamp with the bolt.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)


v.

Connect the connector.



c.
C177133

Install the harness clamp with the nut.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)

NOTICE:
·

When installing the clamp, do not twist the wire harness.

·

Make sure the clamp rotation stopper touches the installation position.




d.
U164926E01
0.625,0.273 1.159,0.442 0.534,0.170 10 Stopper

Install the harness clamp with bolt.

Torque:
except China : 13 N*m (127 kgf*cm, 9 ft.*lbf)
for China : 32 N*m (326 kgf*cm, 24 ft.*lbf)

NOTICE:

Install the bracket so that the rotation stopper touches the knuckle.



e.

Connect the speed sensor connector.

NOTICE:

Securely connect the connector.



Hide 42603 5.INSTALL FRONT WHEEL

Torque:
for Aluminum Wheel : 131 N*m (1336 kgf*cm, 97 ft.*lbf)
for Steel Wheel : 209 N*m (2131 kgf*cm, 154 ft.*lbf)

Hide 28800 6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 89543 7.CHECK SPEED SENSOR SIGNAL