The circuit is used to send control information from the skid control ECU (master cylinder solenoid) to the ECM, and engine control information from the ECM to the skid control ECU (master cylinder solenoid) via the CAN communication system.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1203 | The engine/drivetrain specification and/or destination information from the ECM does not match the skid control ECU data. | ECM |
Check the engine type.
| Result | Proceed to |
|---|---|
| 1VD-FTV | A |
| 1UR-FE | B |
| 1GR-FE | C |
| 3UR-FE | D |
A
B
C
D
Check if the engine control system DTC is output (w/o DPF: See page Engine / Hybrid System>1VD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/o DPF)>DTC CHECK / CLEAR, w/ DPF: See page Engine / Hybrid System>1VD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/ DPF)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is output | A |
| DTC is not output (w/o DPF) | B |
| DTC is not output (w/ DPF) | C |
A
B
C
Check if the engine control system DTC is output (See page Engine / Hybrid System>1UR-FE (ENGINE CONTROL)>SFI SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is output | A |
| DTC is not output | B |
A
B
(See pageEngine / Hybrid System>1UR-FE (ENGINE CONTROL)>SFI SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING)
Check if the engine control system DTC is output (See page Engine / Hybrid System>1GR-FE (ENGINE CONTROL)>SFI SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is output | A |
| DTC is not output | B |
A
B
(See pageEngine / Hybrid System>1GR-FE (ENGINE CONTROL)>SFI SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING)
Check if the engine control system DTC is output (See page Engine / Hybrid System>3UR-FE (ENGINE CONTROL)>SFI SYSTEM(w/o Secondary Air Injection System)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is output | A |
| DTC is not output | B |
A
B