Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VSC OFF SWITCH(w/ Entry and Start System) › from 2015.08
RM2660E _54 Brake _052819 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0255417 VSC OFF SWITCH(w/ Entry and Start System) G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VSC OFF SWITCH(w/ Entry and Start System)  INSPECTION  


PROCEDURE

Hide 84010D 1.CHECK INTEGRATION CONTROL AND PANEL ASSEMBLY (VSC OFF SWITCH)

a.
C331266E16
1.208,1.156 0.49,1.156 false 1.979,1.438 1.979,2.01 1.979,2.01 2.542,2.01 false 0.188,0.135 0.406,0.323 0.219,0.188 10 false *a 0.344,1.073 0.479,1.24 0.135,0.167 10 false E 2.594,1.917 2.729,2.083 0.135,0.167 10 false +

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
5 (E) - 7 (+) Pressed Below 1 Ω
Not pressed 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Integration Control and Panel Assembly (VSC OFF Switch))

If the result is not as specified, replace the integration control and panel assembly (VSC OFF switch).