Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › CRAWL SWITCH(w/o Entry and Start System) › from 2015.08
RM2660E _54 Brake _052819 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0255420 CRAWL SWITCH(w/o Entry and Start System) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  CRAWL SWITCH(w/o Entry and Start System)  INSTALLATION  


PROCEDURE

Hide 89299F 1.INSTALL SUSPENSION CONTROL SWITCH (CRAWL SWITCH)

a.
C338789

Attach the 4 claws to install the suspension control switch (CRAWL switch).

Text in Illustration
V113147

Install in this Direction


b.

Connect the connector.


Hide 58804A 2.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY