Home › Brake › BRAKE (FRONT) › FRONT BRAKE › 2014.08–2015.08
RM2660E _54 Brake _052821 BRAKE (FRONT) _0255429 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  INSTALLATION  


PROCEDURE

Hide 43512 1.INSTALL FRONT DISC

a.
C170927E01
2.516,0.061 3.247,0.235 0.731,0.174 10 Matchmark 1.736,1.101 1.736,0.143 1.736,0.143 2.476,0.143 false 1.736,1.184 2.02,1.184 2.02,1.184 2.02,0.143 false

Align the matchmarks, and then install the front disc.

HINT:

When replacing the front disc with a new one, select the installation position where the front disc has the minimum runout.



Hide 47750 2.INSTALL DISC BRAKE CALIPER ASSEMBLY LH

a.
C165346

Install the disc brake caliper with 2 new bolts.

T = 99 N*m{ 1,010 kgf*cm 73 ft.*lbf }


Hide 47313A 3.CONNECT FRONT FLEXIBLE HOSE

a.
C165345

Install a new gasket and connect the flexible hose with the new union bolt.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 4.INSTALL FRONT DISC BRAKE PAD

a.
C172162

Install the No. 1 anti-squeal shims to each pad.


b.
C170926

Install the 2 pads to the disc brake caliper.


c.
C170925

Install the front disc brake anti-rattle spring between the 2 pads.

NOTICE:

The anti-rattle spring can be reused if it has sufficient rebound; no deformation, cracks or wear; and has had all rust, dirt and foreign particles cleaned off.



d.
C165344

Install the 2 hole pins.


e.

Install the pin hold clip.

NOTICE:

The pin hold clip can be reused if it has sufficient rebound; no deformation or wear; and has had all rust, dirt and foreign particles cleaned off.



Hide 42603 6.INSTALL FRONT WHEEL

Torque:
for Aluminum Wheel : 131 N*m (1336 kgf*cm, 97 ft.*lbf)
for Steel Wheel : 209 N*m (2131 kgf*cm, 154 ft.*lbf)