Home › Brake › BRAKE (FRONT) › FRONT BRAKE
RM2660E _54 Brake _052821 BRAKE (FRONT) _0255429 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the LH side and RH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 47547B 1.TEMPORARILY INSTALL FRONT DISC BRAKE BLEEDER PLUG

a.

Temporarily install the bleeder plug to the disc brake caliper.

HINT:

The bleeder plug will be tightened to a torque specification in the "Bleed Brake Line" procedure.



Hide 31478B 2.INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

Hide 3.INSTALL PISTON SEAL

a.

Apply lithium soap base glycol grease to 4 new piston seals.


b.
C172159

Install the 4 piston seals to the disc brake caliper.


Hide 47731 4.INSTALL FRONT DISC BRAKE PISTON

a.
C172160E04
0.833,2.198 0.833,2.479 false 0.823,1.104 0.823,0.302 0.823,0.302 0.979,0.302 false 0.635,2.854 2.677,3.042 2.042,0.188 10 false Lithium soap base glycol grease 0.604,2.49 1.052,2.667 0.448,0.177 10 false Piston 1.01,0.219 1.885,0.396 0.875,0.177 10 false Cylinder Boot

Apply lithium soap base glycol grease to the 4 front disc brake pistons and 4 new cylinder boots.


b.

Install the 4 cylinder boots to the 4 front disc brake pistons.


c.

Install the 4 pistons into the front disc brake caliper.

NOTICE:

Do not forcibly install the piston into the disc brake caliper.



Hide 5.INSTALL CYLINDER BOOT

a.
C172161E06
1.177,0.729 1.177,0.146 1.177,0.146 1.75,0.146 false 0.969,0.958 0.448,0.958 0.448,0.958 0.448,1.823 false 1.833,0.063 2.74,0.24 0.906,0.177 10 false Cylinder Boot 0.094,1.854 0.708,2.031 0.615,0.177 10 false Set Ring

Install one side of each of the 4 cylinder boots to the front disc brake caliper.

NOTICE:
·

Install the cylinder boot securely to the grooves of the cylinder and piston.

·

Do not damage the cylinder boot.




Hide 47731A 6.INSTALL FRONT DISC BRAKE PISTON SET RING

a.

Install the 4 set rings.