Home › Brake › BRAKE (FRONT) › FRONT BRAKE FLEXIBLE HOSE
RM2660E _54 Brake _052821 BRAKE (FRONT) _0255430 FRONT BRAKE FLEXIBLE HOSE A

BRAKE (FRONT)  FRONT BRAKE FLEXIBLE HOSE  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the LH side and RH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 47313A 1.INSTALL FRONT FLEXIBLE HOSE

a.
C170915E02
1.208,0.74 1.354,0.875 1.354,0.875 1.438,0.875 false 1.479,0.188 2.49,0.365 1.01,0.177 10 false Fulcrum Length 1.479,0.802 2.656,0.979 1.177,0.177 10 false Union Nut Wrench

Install a new clip to the flexible hose.


b.

Using a union nut wrench, connect the flexible hose to the brake tube while holding the flexible hose with a wrench.

Torque:
without union nut wrench : 15 N*m (155 kgf*cm, 11 ft.*lbf)
with union nut wrench : 14 N*m (145 kgf*cm, 10 ft.*lbf)

NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

·

Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

·

The torque value for use with a union nut wrench is effective when the union nut wrench is parallel to the torque wrench.




c.

Install the bolt.

Torque:
31 N*m (316 kgf*cm, 23 ft.*lbf)


d.
C165345

Install a new gasket and connect the flexible hose with the new union bolt.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 42603 3.INSTALL FRONT WHEEL

Torque:
for Aluminum Wheel : 131 N*m (1336 kgf*cm, 97 ft.*lbf)
for Steel Wheel : 209 N*m (2131 kgf*cm, 154 ft.*lbf)