31478C
1.REMOVE REAR DISC BRAKE BLEEDER PLUG CAP
47547C
2.REMOVE REAR DISC BRAKE BLEEDER PLUG
3.REMOVE CYLINDER BOOT
Using a screwdriver, remove the cylinder boot from the cylinder.
Tape the screwdriver tip before use.
47831
4.REMOVE REAR DISC BRAKE PISTON
Place a piece of cloth or a similar object between the piston and cylinder.
Use compressed air to remove the piston from the cylinder.
Do not place your fingers in front of the piston when using compressed air.
5.REMOVE PISTON SEAL
Using a screwdriver, remove the piston seal from the cylinder.
Do not damage the inner cylinder and cylinder groove.
Tape the screwdriver tip before use.