Home › Brake › BRAKE (REAR) › REAR BRAKE
RM2660E _54 Brake _052822 BRAKE (REAR) _0255431 REAR BRAKE A

BRAKE (REAR)  REAR BRAKE  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL PISTON SEAL

a.

Apply lithium soap base glycol grease to a new piston seal.


b.
C172165

Install the piston seal to the disc brake cylinder.


Hide 2.INSTALL CYLINDER BOOT

a.

Apply lithium soap base glycol grease to the piston and a new cylinder boot.


b.
C172166E05
0.583,2.885 2.615,3.083 2.031,0.198 10 false Lithium soap base glycol grease

Install the cylinder boot to the piston as shown in the illustration.


Hide 47731B 3.INSTALL REAR DISC BRAKE PISTON

a.

Install the cylinder boot to the disc brake cylinder.

NOTICE:

Install the boot securely to the grooves of the disc brake cylinder.



b.
C172167

Push in the piston by hand and install the cylinder boot onto the grooves of the piston.

NOTICE:

Install the boot securely to the grooves of the piston.



Hide 47547C 4.TEMPORARILY INSTALL REAR DISC BRAKE BLEEDER PLUG

a.

Temporarily install the bleeder plug to the disc brake cylinder.

HINT:

The bleeder plug will be tightened to a torque specification in the "Bleed Brake Line" procedure.



Hide 31478C 5.INSTALL REAR DISC BRAKE BLEEDER PLUG CAP