Home › Brake › BRAKE (REAR) › REAR BRAKE FLEXIBLE HOSE
RM2660E _54 Brake _052822 BRAKE (REAR) _0255432 REAR BRAKE FLEXIBLE HOSE A

BRAKE (REAR)  REAR BRAKE FLEXIBLE HOSE  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the LH side and RH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 47356 1.INSTALL NO. 6 FLEXIBLE HOSE BRACKET

a.
C177145

Install the bracket with the bolt.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


Hide 47319F 2.INSTALL REAR FLEXIBLE HOSE

a.

Connect the flexible hose to the connecting point with each brake tube, and then install 2 new clips.


b.

Using a union nut wrench, connect each brake tube to the flexible hose while holding the flexible hose with a wrench.

C358006E01
4.635,1.458 4.635,1.792 4.635,1.792 5.052,1.792 false 5.052,0.729 6.073,1.073 1.021,0.344 10 false Fulcrum Length 5.115,1.708 6.396,2.115 1.281,0.406 10 false Union Nut Wrench

Torque:
without union nut wrench : 15 N*m (155 kgf*cm, 11 ft.*lbf)
with union nut wrench : 14 N*m (145 kgf*cm, 10 ft.*lbf)

NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.



HINT:
·

Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

·

The torque value for use with a union nut wrench is effective when the union nut wrench is parallel to the torque wrench.




c.

Connect the flexible hose to the connecting point with each brake tube, and then install 2 new clips.

C358007E01
5.146,1.625 4.646,1.625 4.646,1.625 4.646,1.458 false 5.104,0.75 6.052,1.219 0.948,0.469 10 false Fulcrum Length 5.208,1.552 6.375,1.948 1.167,0.396 10 false Union Nut Wrench


d.

Using a union nut wrench, connect each brake tube to the flexible hose while holding the flexible hose with a wrench.

Torque:
without union nut wrench : 15 N*m (155 kgf*cm, 11 ft.*lbf)
with union nut wrench : 14 N*m (145 kgf*cm, 10 ft.*lbf)

NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.



HINT:
·

Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

·

The torque value for use with a union nut wrench is effective when the union nut wrench is parallel to the torque wrench.




Hide 47319F 3.INSTALL REAR FLEXIBLE HOSE LH

a.
U164636E01
1.496,0.057 2.492,0.227 0.996,0.170 10 Fulcrum Length 1.652,0.803 2.812,0.972 1.159,0.170 10 Union Nut Wrench 1.326,0.732 1.53,0.882 1.53,0.882 1.627,0.882 false

Connect the flexible hose to the connecting point with the brake tube, and then install a new clip.


b.

Using a union nut wrench, connect the brake tube to the flexible hose while holding the flexible hose with a wrench.

Torque:
without union nut wrench : 15 N*m (155 kgf*cm, 11 ft.*lbf)
with union nut wrench : 14 N*m (145 kgf*cm, 10 ft.*lbf)

NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.



HINT:
·

Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

·

The torque value for use with a union nut wrench is effective when the union nut wrench is parallel to the torque wrench.




c.
C170918

Install the flexible hose and a new gasket to the disc brake cylinder with the new union bolt.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)

HINT:

Install the flexible hose lock securely in the lock hole in the cylinder.



Hide 42603 5.INSTALL REAR WHEEL

Torque:
for Aluminum Wheel : 131 N*m (1336 kgf*cm, 97 ft.*lbf)
for Steel Wheel : 209 N*m (2131 kgf*cm, 154 ft.*lbf)