Home › Brake › PARKING BRAKE › PARKING BRAKE ASSEMBLY
RM2660E _54 Brake _052823 PARKING BRAKE _0255436 PARKING BRAKE ASSEMBLY A

PARKING BRAKE  PARKING BRAKE ASSEMBLY  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the LH side and RH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 1.REMOVE REAR WHEEL LH

Hide 2.DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH

a.
C172183

Remove the 2 bolts and disconnect the rear disc brake cylinder.

NOTICE:
·

Do not disconnect the flexible hose from the disc brake cylinder.

·

Do not twist or bend the flexible hose.




b.

Hang the disc brake cylinder with a piece of wire.


Hide 42431 3.REMOVE REAR DISC

a.
C172168E09
1.875,0.969 1.875,0.25 1.875,0.25 2.458,0.25 true 1.896,1.042 2.188,1.042 2.188,1.042 2.188,0.26 true 2.5,0.177 3.219,0.354 0.719,0.177 10 true Matchmark

Put matchmarks on the rear disc and axle hub if planning to reuse the disc.


b.
C155453

Turn the shoe adjuster until the disc turns freely, and then remove the disc.


Hide 4.REMOVE PARKING BRAKE SHOE RETURN SPRING

a.
C172171E02
2.271,0.76 2.74,0.229 2.74,0.229 2.865,0.229 true 2.938,0.156 3.26,0.313 0.323,0.156 10 false SST

Using SST, remove the return spring.

SST
09703-30011  


Hide 46580 5.REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH

a.
C172174E02
2.448,0.802 2.573,0.198 2.573,0.198 2.729,0.198 true 2.781,0.125 3.094,0.271 0.313,0.146 10 false SST

Using SST, remove the shoe hold down spring cup, compression spring and shoe hold down spring pin.

SST
09718-00011  


b.
C172180

Disconnect the tension spring from the No. 1 parking brake shoe.


c.
C172179

Remove the No. 1 parking brake shoe and shoe adjuster screw set.


Hide 46590 6.REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY LH

a.
C172175E03
1.438,1.417 0.615,1.417 true 0.281,1.354 0.594,1.51 0.313,0.156 10 false SST

Using SST, remove the shoe hold down spring cup, compression spring and shoe hold down spring pin.

SST
09718-00011  


b.

Remove the No. 2 parking brake shoe.


Hide 7.REMOVE PARKING BRAKE SHOE LEVER LH

a.

Disconnect the No. 3 parking brake cable from the parking brake shoe lever.


b.
C172177

Remove the parking brake shoe lever.


Hide 46430 8.REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

a.
C170909

Remove the bolt and No. 3 parking brake cable.


Hide 9.REMOVE PARKING BRAKE ANCHOR BLOCK

a.
C172176

Remove the 2 nuts and anchor block.