Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP (for 1VD-FTV without DPF) › 2014.08–2015.08
RM2660E _55 Steering _052824 POWER ASSIST SYSTEMS _0255438 VANE PUMP(for 1VD-FTV without DPF) A

POWER ASSIST SYSTEMS  VANE PUMP(for 1VD-FTV without DPF)  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:

When using a vise, do not overtighten it.


PROCEDURE

Hide 44337 1.REMOVE POWER STEERING SUCTION PORT UNION

a.

Remove the bolt and suction port union from the vane pump.


b.

Using a screwdriver, remove the O-ring from the suction port union.


Hide 2.REMOVE FLOW CONTROL VALVE

C162100

a.

Remove the pressure port union.


b.

Remove the O-ring from the pressure port union.


c.

Remove the flow control valve and compression spring.


Hide 3.REMOVE VANE PUMP GEAR

a.
C162114E01
0.277,0.294 0.638,0.464 0.361,0.170 10 SST 0.657,0.381 0.913,0.381 0.913,0.381 1.138,0.542 false

Using soft jaws on a vise, clamp the vane pump.

NOTICE:

Be careful not to damage the vane pump.



b.

Using SST, remove the gear.

SST
09950-30012  (09951-03010, 09953-03010, 09954-03010, 09955-03011)


Hide 4.REMOVE REAR VANE PUMP HOUSING

a.
C162098

Remove the 4 bolts and rear housing from the front housing.


b.
C162099E01
1.988,0.215 3.001,0.387 1.014,0.172 10 Protective Tape 1.944,0.302 1.779,0.302 1.779,0.302 1.386,1.111 false

Using a screwdriver, remove the O-ring from the rear housing.

HINT:

Tape the screwdriver tip before use.



Hide 5.REMOVE VANE PUMP ROTOR, 10 VANE PUMP PLATES AND VANE PUMP CAM RING

a.

Remove the 10 vane pump plates.

NOTICE:

Take care not to drop the vane pump plates.



b.

Remove the rotor.


c.

Remove the cam ring from the front housing.


Hide 6.REMOVE VANE PUMP FRONT SIDE PLATE

a.

Remove the front side plate from the front housing.


b.
C162121E01
2.006,0.196 3.023,0.370 1.017,0.174 10 Protective Tape 1.942,0.261 1.682,0.261 1.682,0.261 1.357,0.931 false

Using a screwdriver, remove the O-ring from the front side plate.

HINT:

Tape the screwdriver tip before use.



c.
C162123

Remove the O-ring from the front housing.


Hide 7.REMOVE VANE PUMP SHAFT WITH VANE PUMP SHAFT BEARING

a.
C161392E01
2.579,0.343 3.274,0.695 0.695,0.352 10 Protective Tape 2.552,0.425 2.474,0.425 2.474,0.425 2.119,0.936 false

Using a screwdriver, remove the snap ring.

NOTICE:

Be careful not to damage the front housing.


HINT:

Tape the screwdriver tip before use.



b.
C164630E01
2.525,0.115 3.181,0.457 0.656,0.341 10 Protective Tape 2.461,0.18 2.134,0.18 2.134,0.18 1.727,0.851 false

Tape the serrated part of the vane pump shaft.


c.
C161393

Using a press, press out the shaft with bearing.


Hide 8.REMOVE VANE PUMP SHAFT BEARING

a.
C162115

Using 2 screwdrivers, remove the snap ring from the shaft.

NOTICE:

Be careful not to damage the shaft.



b.
C162117

Using a press, press out the bearing from the shaft.


Hide 9.REMOVE VANE PUMP HOUSING OIL SEAL

a.
C161396

Using a screwdriver, pry out the oil seal.

NOTICE:

Be careful not to damage the front housing.


HINT:

Tape the screwdriver tip before use.