Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP (for 1UR-FE) › 2014.08–2015.08
RM2660E _55 Steering _052824 POWER ASSIST SYSTEMS _0255442 VANE PUMP(for 1UR-FE) A

POWER ASSIST SYSTEMS  VANE PUMP(for 1UR-FE)  DISASSEMBLY  


PROCEDURE

Hide 44320 1.FIX VANE PUMP ASSEMBLY

a.
C158820E01
0.503,1.434 0.862,1.611 0.360,0.177 10 SST 0.868,1.521 1.44,1.521 false

Using SST, fix the vane pump in a vise.

SST
09630-00014  (09631-00132)


Hide 44337 2.REMOVE POWER STEERING SUCTION PORT UNION

a.
C158821

Remove the bolt and suction port union from the vane pump.


b.

Using a screwdriver, remove the O-ring from the suction port union.


Hide 3.REMOVE FLOW CONTROL VALVE

a.
C228110

Remove the pressure port union.


b.

Remove the O-ring from the pressure port union.


c.

Remove the flow control valve and compression spring.


Hide 4.REMOVE VANE PUMP REAR HOUSING

a.
C131230

Remove the 4 bolts and rear housing from the front housing.


b.
C107025E04
2.008,0.196 2.202,0.383 0.194,0.187 10 *1 1.974,0.282 1.69,0.282 1.69,0.282 1.276,1.15 false

Using a screwdriver, remove the O-ring from the rear housing.

Text in Illustration
*1 Protective Tape

HINT:

Tape the screwdriver tip before use.



Hide 44312 5.REMOVE VANE PUMP SHAFT WITH VANE PUMP PULLEY

a.
C131231

Using 2 screwdrivers, remove the snap ring from the vane pump shaft.


b.

Remove the vane pump shaft with vane pump pulley.

NOTICE:

Be careful not to drop or damage the vane pump shaft with vane pump pulley. If it is damaged, replace the vane pump assembly.



Hide 6.REMOVE VANE PUMP ROTOR

a.
C114697

Remove the 10 vane pump plates.

NOTICE:

Take care not to drop the vane pump plate.



b.

Remove the vane pump rotor.


Hide 7.REMOVE VANE PUMP CAM RING

a.
C114698

Remove the cam ring from the front housing.


Hide 44341 8.REMOVE VANE PUMP FRONT SIDE PLATE

a.
C114699

Remove the front side plate from the front housing.


b.
C107029E08
1.26,0.75 1.51,0.354 true 1.542,0.26 1.74,0.458 0.198,0.198 10 false *1

Using a screwdriver, remove the O-ring from the front side plate.

Text in Illustration
*1 Protective Tape

HINT:

Tape the screwdriver tip before use.



c.
C114700

Remove the O-ring from the front housing.


Hide 9.REMOVE VANE PUMP HOUSING OIL SEAL

a.
C114701E07
1.927,0.552 2.052,0.24 2.052,0.24 2.167,0.24 false 2.219,0.177 2.51,0.365 0.292,0.188 10 false *1

Using a screwdriver and piece of cloth, pry out the oil seal.

Text in Illustration
*1 Cloth

NOTICE:

Be careful not to damage the front housing.