Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM(for 1VD-FTV with DPF) › 2014.08–2015.08
RM2660E _55 Steering _052824 POWER ASSIST SYSTEMS _0255443 POWER STEERING SYSTEM(for 1VD-FTV with DPF) C

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM(for 1VD-FTV with DPF)  U0100  Lost Communication with ECM / PCM "A"  U0126  Lost Communication with Steering Angle Sensor Module  U0129  Lost Communication with Brake System Control Module  U0130  Lost Communication with Steering Effort Control Module  


DESCRIPTION

The power steering ECU receives signals from the ECM, steering angle sensor, skid control ECU and steering control ECU via the CAN communication system.

DTC Code DTC Detection Condition Trouble Area
U0100 The engine speed signal is lost.
·

ECM

·

CAN communication system

·

Power steering ECU assembly


U0126 The steering angle signal is lost.
·

Steering angle sensor

·

CAN communication system

·

Power steering ECU assembly


U0129 The vehicle speed signal is lost.
·

Skid control ECU

·

CAN communication system

·

Power steering ECU assembly


U0130 The VGRS relative angle signal is lost.
·

Steering control ECU

·

CAN communication system

·

Power steering ECU assembly



PROCEDURE

1.CHECK FOR DTC (CAN COMMUNICATION SYSTEM)

b.

Check for DTCs (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM(for 1VD-FTV with DPF)>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC is not output. A
DTC is output. for LHD B
for RHD C



A

B

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)

C

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)