The multiplex tilt and telescopic ECU receives signals from the main body ECU (multiplex network body ECU) and front power seat switch LH*1 or RH*2 via CAN communication.
*1: for LHD
*2: for RHD
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0142 | Either condition is met:
·
The memory data signal received from the main body ECU (multiplex network body ECU) is lost for 3.3 seconds. ·
The ignition switch signal received from the main body ECU (multiplex network body ECU) is lost for 10 seconds or more. |
·
CAN communication system ·
Main body ECU (Multiplex network body ECU) |
| U0208 | The memory and recall request signals from the front power seat switch LH*1 or RH*2 are lost for 10 seconds or more. | ·
CAN communication system ·
Front power seat switch LH*1 or RH*2 |
*1: for LHD
*2: for RHD
Go to CAN Communication System.
CAN communication system (for LHD with central gateway ECU) (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for LHD with Central Gateway ECU)>HOW TO PROCEED WITH TROUBLESHOOTING).
CAN communication system (for LHD without central gateway ECU) (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for LHD without Central Gateway ECU)>HOW TO PROCEED WITH TROUBLESHOOTING).
CAN communication system (for RHD with central gateway ECU) (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for RHD with Central Gateway ECU)>HOW TO PROCEED WITH TROUBLESHOOTING).
CAN communication system (for RHD without central gateway ECU) (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for RHD without Central Gateway ECU)>HOW TO PROCEED WITH TROUBLESHOOTING).
NEXT