Home › Steering › STEERING COLUMN › STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column) › 2014.08–2015.08
RM2660E _55 Steering _052826 STEERING COLUMN _0255455 STEERING COLUMN ASSEMBLY(for Power Tilt and Power Telescopic Steering Column) A

STEERING COLUMN  STEERING COLUMN ASSEMBLY(for Power Tilt and Power Telescopic Steering Column)  REASSEMBLY  


PROCEDURE

Hide 89227 1.INSTALL MULTIPLEX TILT AND TELESCOPIC ECU

C172655

a.

Install the ECU with the 2 screws.

Torque:
1.5 N*m (15 kgf*cm, 13 in.*lbf)


b.

Connect the 2 connectors.

NOTICE:

The connectors on both ends of the wire harness between the telescopic motor and ECU are the same shape. When installing them, connect the connectors of the same color.



Hide 45020A 2.INSTALL STEERING LOCK ACTUATOR ASSEMBLY

C147319

a.

Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.


b.

Tighten the 2 tapered-head bolts until the bolt heads break off.