89235A
1.INSTALL TILT AND TELESCOPIC MANUAL SWITCH
Attach the claw to install the tilt and telescopic manual switch.
Connect the connector.
45286B
2.INSTALL LOWER STEERING COLUMN COVER
Attach the 2 claws to install the lower steering column cover.
Install the 3 screws.
Turn the steering wheel to the right and left as necessary to install the 2 screws.
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Reset the AUTO TILT AWAY function setting to the previous condition by changing the customize parameter (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
4.CHECK SRS WARNING LIGHT