Home › Steering › STEERING GEAR / LINKAGE › STEERING LINKAGE
RM2660E _55 Steering _052827 STEERING GEAR / LINKAGE _0255463 STEERING LINKAGE A

STEERING GEAR / LINKAGE  STEERING LINKAGE  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 44200 1. FIX POWER STEERING LINK ASSEMBLY

a.
C344800E04
1.802,1.063 2.531,0.833 true 1.25,0.792 0.781,0.49 false 2.604,0.75 3.281,1.177 0.677,0.427 10 false Protective Tape 0.49,0.375 1.188,0.656 0.698,0.281 10 false SST

Using SST, fix the power steering link in a vise.

SST
09612-00012  

HINT:

Tape SST before use.


NOTICE:

When using a vise, do not overtighten it.



Hide 2.REMOVE STEERING RACK BOOT CLIP LH

a.

Using pliers, remove the steering rack boot clip.


Hide 3.REMOVE STEERING RACK BOOT CLIP RH

HINT:

Use the same procedures described for the LH side.


Hide 4.REMOVE STEERING RACK BOOT CLAMP LH

C172443

a.

Using pliers, remove the boot clamp as shown in the illustration.

NOTICE:

Be careful not to damage the steering rack boot.



Hide 5.REMOVE STEERING RACK BOOT CLAMP RH

HINT:

Use the same procedures described for the LH side.


Hide 45535 6.REMOVE NO. 1 STEERING RACK BOOT

a.

Remove the steering rack boot LH and RH.


Hide 45503 7.REMOVE STEERING RACK END SUB-ASSEMBLY

a.
C344797E04
0.906,3.031 0.573,3.552 true 2.5,3.927 0.573,3.552 true 2,1.031 0.823,1.208 true 1.75,1.25 0.823,1.208 true 0.156,0.094 0.771,0.25 0.615,0.156 10 false LH Side: 1.844,1.646 2.25,1.865 0.406,0.219 10 false Turn 0.146,2.385 0.76,2.542 0.615,0.156 10 false RH Side: 0.177,3.5 0.542,3.667 0.365,0.167 10 false SST 1.792,2.635 2.198,2.854 0.406,0.219 10 false Turn 2.646,4.26 3.052,4.479 0.406,0.219 10 false Hold 2.708,0.479 3.115,0.698 0.406,0.219 10 false Hold 0.427,1.135 0.792,1.302 0.365,0.167 10 false SST

Using a SST, hold the steering rack (LH side).

SST
09922-10010  


b.

Using SST, remove the steering rack end (LH side) from the power steering rack.

SST
09922-10010  

HINT:

Rotate SST in the direction shown in the illustration.



c.

Using SST, remove the steering rack end (RH side) from the power steering rack.

SST
09922-10010  

HINT:

Rotate SST in the direction show in the illustration.


NOTICE:
·

Do not mistake the direction of SST.

·

Make sure to keep the power steering rack fixed in place with SST.