Home › Audio / Visual / Telematics › AUDIO / VIDEO › REAR DOOR SPEAKER
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255468 REAR DOOR SPEAKER G

AUDIO / VIDEO  REAR DOOR SPEAKER  INSPECTION  


PROCEDURE

Hide 86160C 1.INSPECT REAR SPEAKER SET (except 14 Speakers)

a.
E107214E19
0.153,0.064 0.475,0.274 0.322,0.210 10 *1

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*1 Component without harness connected
(Rear Speaker Set)

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 4 Ω


If the result is not as specified, replace the speaker set.


Hide 86160C 2.INSPECT REAR SPEAKER SET (for 14 Speakers)

a.
E107214E19
0.153,0.064 0.475,0.274 0.322,0.210 10 *1

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*1 Component without harness connected
(Rear Speaker Set)

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 1.5 to 2.3 Ω


If the result is not as specified, replace the speaker set.


Hide 86160Z 3.INSPECT REAR NO. 3 SPEAKER ASSEMBLY (for 14 Speakers)

a.

When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.

OK:

Malfunction disappears.


HINT:
·

Connect all the connectors to the rear No. 3 speakers.

·

When there is a possibility that either the right or left rear speaker is defective, inspect by interchanging the right one with the left one.

·

Perform the inspection above on both LH and RH sides.