1. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
74610A
3.REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY
62212
4.REMOVE FRONT PILLAR GARNISH LH
86160J
5.REMOVE FRONT NO. 3 SPEAKER ASSEMBLY
Detach the 3 claws and remove the speaker.