This is the display signal circuit between the headphone terminal and multi-display controller sub-assembly.
Disconnect the L68 multi-display controller sub-assembly connector.
Disconnect the P1 headphone terminal connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| L68-2 (VD) - P1-13 (VV+) | Always | Below 1 Ω |
| L68-3 (VG) - P1-14 (VV-) | Always | Below 1 Ω |
| L68-10 (ADPI) - P1-8 (ADPG) | Always | Below 1 Ω |
| L68-2 (VD) - Body ground | Always | 10 kΩ or higher |
| L68-3 (VG) - Body ground | Always | 10 kΩ or higher |
| L68-10 (ADPI) - Body ground | Always | 10 kΩ or higher |
| L68-1 (SGN5) - Body ground | Always | 10 kΩ or higher |
OK
(See pageAudio / Visual / Telematics>AUDIO / VIDEO>REAR SEAT ENTERTAINMENT SYSTEM>PROBLEM SYMPTOMS TABLE)
NG