Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(w/o Stereo Component Amplifier) › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255477 AUDIO AND VISUAL SYSTEM(w/o Stereo Component Amplifier) D

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(w/o Stereo Component Amplifier)  IDENTIFICATION OF NOISE SOURCE  


RADIO WAVE BAND


a.

Radio frequency band

i.

Radio broadcasts use the radio frequency bands shown in the table below.

E108734E32
0.677,0.302 1.625,0.531 0.948,0.229 10 false Frequency 1.875,0.333 2.417,0.531 0.542,0.198 10 false 30 kHz 5.24,0.313 5.854,0.51 0.615,0.198 10 false 30 MHz 4.198,0.302 4.781,0.5 0.583,0.198 10 false 3 MHz 2.979,0.302 3.625,0.5 0.646,0.198 10 false 300 kHz 6.354,0.292 7.115,0.49 0.76,0.198 10 false 300 MHz 0.677,0.875 1.656,1.073 0.979,0.198 10 false Designation 0.688,1.365 1.625,1.594 0.938,0.229 10 false Radio Wave 0.719,1.823 1.656,2.052 0.938,0.229 10 false Modulation 2.583,0.917 2.854,1.115 0.271,0.198 10 false LF 3.677,0.906 3.948,1.104 0.271,0.198 10 false MF 4.844,0.917 5.115,1.115 0.271,0.198 10 false HF 5.875,0.906 6.26,1.104 0.385,0.198 10 false VHF 3.531,1.344 3.802,1.542 0.271,0.198 10 false AM 5.781,1.375 6.052,1.573 0.271,0.198 10 false FM 5.51,1.813 6.938,2.031 1.427,0.219 10 false Frequency Modulation 3.083,1.844 4.802,2.042 1.719,0.198 10 false Amplitude Modulation 0.333,2.333 1.833,2.563 1.5,0.229 10 false LF: Low Frequency 5.094,2.333 7.146,2.563 2.052,0.229 10 false VHF: Very High Frequency 3.781,2.313 5.365,2.542 1.583,0.229 10 false HF: High Frequency 1.958,2.333 3.927,2.563 1.969,0.229 10 false MF: Medium Frequency




SERVICE AREA


E108735E15
0.563,1.708 1.333,1.906 0.771,0.198 10 false FM (Stereo) 0.708,2.198 1.688,2.396 0.979,0.198 10 false FM (Monaural) 1.646,2.698 1.896,2.896 0.25,0.198 10 false AM

a.

The broadcast range for AM and FM is very different. Sometimes an AM broadcast can be received very clearly but FM stereo cannot.

FM stereo has the smallest service area, and is prone to picking up static and other types of interference (for example, noise).



RECEPTION PROBLEMS


HINT:

Besides the problem of static, there are other problems, such as "phasing", "multipath" and "fade out". These problems are caused by the nature of the radio waves themselves, not by electrical noise.


a.
I100011E02
2.392,0.332 2.787,0.658 false 0.1,0.017 0.654,0.233 0.554,0.216 10 Phasing 2.507,0.647 3.323,0.863 0.816,0.216 10 Ionosphere

AM broadcasts are susceptible to electrical interference called phasing. Occurring only at night, phasing is the interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off of the ionosphere and the other signal is received directly from the transmitter.


b.
I100012E02
0.014,0.011 0.629,0.213 0.614,0.202 10 Multipath

Multipath is a type of interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off of buildings or mountains and the other signal is received directly from the transmitter.


c.
I100013E02
0.101,0.072 0.835,0.274 0.734,0.202 10 Fade Out

Fade out is caused by objects (buildings, mountains, etc.) that deflect away part of a signal, resulting in a weaker signal when the object is between the transmitter and vehicle. High frequency radio waves, such as FM broadcasts, are easily deflected by obstructions. Low frequency radio waves, such as AM broadcasts, are much more difficult to deflect.



NOISE PROBLEMS


a.

Technicians must have a clear understanding about the noise problems of the vehicle of the customer. Use the following table to diagnose the problems.

Radio Wave Condition in Which Noise Occurs Presumable Cause
AM Noise occurs in a specific area Strong possibility of foreign noise
AM Noise occurs when broadcasting is weak
·

Same program may be broadcasted from various local stations

·

If the program is the same, one of those may be tuned in


AM Noise occurs only at night Strong possibility of beats from distant broadcasting
FM Noise occurs at a specific place during driving Strong possibility of multipath noise and fading noise caused by changes of FM frequency

HINT:

When the noise does not match the examples above, refer to "Reception Problems". Check the descriptions about phasing and multipath.