Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(w/ Navigation System) › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255478 AUDIO AND VISUAL SYSTEM(w/ Navigation System) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(w/ Navigation System)  Stereo Component Amplifier Power Source Circuit  


DESCRIPTION

This circuit provides power to the stereo component amplifier assembly.

WIRING DIAGRAM

C253075E02
5.543,0.765 5.836,0.930 0.292,0.165 10 +B 5.543,1.94 5.926,2.105 0.383,0.165 10 GND 5.543,2.528 5.996,2.693 0.452,0.165 10 GND2 5.543,1.352 6.010,1.518 0.466,0.165 10 +B2 5.217,2.436 5.441,2.601 0.224,0.165 10 18 5.273,1.847 5.497,2.013 0.224,0.165 10 3 5.273,0.664 5.497,0.829 0.224,0.165 10 1 5.217,1.259 5.441,1.424 0.224,0.165 10 16 3.762,1.549 4.675,1.726 0.913,0.177 10 AMP1 3.762,0.905 4.675,1.081 0.913,0.177 10 AMP2 1.359,1.311 2.189,1.488 0.830,0.177 10 from Battery 1.359,0.75 2.189,0.927 0.830,0.177 10 from Battery 5.194,3.064 6.520,3.389 1.326,0.325 10 Stereo Component Amplifier Assembly 5.194,2.906 5.492,3.080 0.298,0.174 10 F74

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - BATTERY AND BODY GROUND)
a.
U166279E02
0.781,1.281 0.625,1.833 false 1.094,1.302 1.292,1.802 false 0.76,1.083 0.396,0.885 false 1.063,1.073 0.677,0.583 false 1.5,0.385 1.781,0.552 0.281,0.167 10 false F74 0.292,0.469 0.646,0.635 0.354,0.167 10 false GND 0.083,0.01 0.438,0.177 0.354,0.167 10 false *a 0.146,0.792 0.385,0.958 0.24,0.167 10 false +B 0.458,1.854 0.771,2.031 0.313,0.177 10 false +B2 1.125,1.844 1.552,2.021 0.427,0.177 10 false GND2

Disconnect the stereo component amplifier assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F74-3 (GND) - Body ground Always Below 1 Ω
F74-18 (GND2) - Body ground Always Below 1 Ω



c.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
F74-1 (+B) - Body ground Always 11 to 14 V
F74-16 (+B2) - Body ground Always 11 to 14 V



Text in Illustration
*a Front view of wire harness connector
(to Stereo Component Amplifier Assembly)


OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR