Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(w/o Navigation System) › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255479 AUDIO AND VISUAL SYSTEM(w/o Navigation System) C

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(w/o Navigation System)  01-E0  Registration Complete Indication Error  01-E3  Registration Demand Transmission  01-E4  Multiple Frame Incomplete  


DESCRIPTION

DTC No. DTC Detection Condition Trouble Area
01-E0 "Registration complete" signal from the master device cannot be received. -
01-E3 Either condition is met:
·

The registration demand signal from the slave device is output.

·

The registration demand signal is output by receiving connection confirmation signal from the sub-master device.


-
01-E4 The multiple frame transmission is incomplete. -

HINT:

Even if no fault is present, these DTCs may be stored depending on the battery condition or engine start voltage.


CAUTION / NOTICE / HINT

HINT:

After the inspection is completed, clear the DTCs. These DTCs do not indicate a malfunction.


PROCEDURE

1.INSPECT BATTERY
a.

Check the battery voltage.

Standard voltage:

11 to 14 V




OK

2.CLEAR DTC

NG

CHECK OR REPLACE CHARGING SYSTEM OR BATTERY