This circuit is used when an incoming cellular phone voice in the "Bluetooth" handsfree system is received.
Disconnect the F19 radio receiver assembly and F18 stereo component amplifier assembly connectors.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| F19-11 (IVO+) - F18-15 (II1+) | Always | Below 1 Ω |
| F19-12 (IVO-) - F18-14 (II1-) | Always | Below 1 Ω |
| F19-11 (IVO+) - Body ground | Always | 10 kΩ or higher |
| F19-12 (IVO-) - Body ground | Always | 10 kΩ or higher |
| F19-13 (SLD1) - Body ground | Always | 10 kΩ or higher |
OK
NG