Home › Audio / Visual / Telematics › AUDIO / VIDEO › TELEVISION DISPLAY › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255480 TELEVISION DISPLAY A

AUDIO / VIDEO  TELEVISION DISPLAY  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

CAUTION:

After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 86295 3.REMOVE TELEVISION BASE

a.
E332499

Detach the 3 claws.


b.

Detach the 3 guides and remove the television base.


Hide 86680A 4.REMOVE TELEVISION DISPLAY ASSEMBLY

a.
E332500

Disconnect the connectors.


b.

Remove the 3 nuts and television display assembly.