Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255487 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Display does not Dim when Light Control Switch is Turned ON  


CAUTION / NOTICE / HINT

HINT:

When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


PROCEDURE

1.CHECK IMAGE QUALITY SETTING
a.

Display the "Display" screen.


b.

Turn the headlight dimmer switch assembly to the tail or head position.


c.

Check if "Day Mode" on the display adjustment screen is on.

OK:

"Day Mode" setting is off




OK

2.CHECK VEHICLE SIGNAL (OPERATION CHECK)

NG

TURN "Day Mode" SETTING OFF

2.CHECK VEHICLE SIGNAL (OPERATION CHECK)
a.

Enter the "Vehicle Signal Check Mode" screen. [Refer to Check Vehicle Signal in Operation Check (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>OPERATION CHECK)]


E278187

b.

Check that the display for "TAIL" changes between ON and OFF according to the headlight dimmer switch assembly operation.

OK:
Headlight Dimmer Switch Assembly Display
Tail or head ON
Off OFF


HINT:

This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.



c.

Check that the display for "ADIM/TCAN" changes between DIM and BRIGHT according to the headlight dimmer switch assembly operation.

OK:
Headlight Dimmer Switch Assembly Display
Tail or head DIM
Off BRIGHT




OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG