Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255487 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Application Link Function cannot be Started  


CAUTION / NOTICE / HINT

HINT:

When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


PROCEDURE

1.CHECK "iPhone" OR "iPod touch"
a.

Check that the connected "iPhone" or "iPod touch" is powered on.

Result
Result Proceed to
The connected "iPhone" or "iPod touch" is powered on A
The connected "iPhone" or "iPod touch" is not powered on B



A

2.CHECK CONNECTION CONDITION

B

TURN "iPhone" OR "iPod touch" ON

2.CHECK CONNECTION CONDITION
a.

Check that the "iPhone" or "iPod touch" is connected to the head unit using a dedicated cable.


Result
Result Proceed to
Dedicated cable is used A
Dedicated cable is not used B


A

3.CHECK USAGE CONDITION

B

USE DEDICATED CABLE

3.CHECK USAGE CONDITION
a.

Check the conditions under which the Application Link function is being used.


Result
Result Proceed to
The application does not automatically start when the engine switch is turned from off to on (IG) A
The application closes after the hands-free function is used
The application closes after another application is started on the "iPhone" or "iPod touch"
None of the above B


A

RESTART APPLICATION LINK COMPATIBLE APPLICATION

B

4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.

Check that "Connected services" is not illuminated on the information screen of the radio and display receiver assembly.


Result
Result Proceed to
"Connected services" is not illuminated A
"Connected services" is illuminated B


A

5.CHECK "iPhone" OR "iPod touch"

B

6.CHECK APPLICATION
5.CHECK "iPhone" OR "iPod touch"
a.

Refer to System Description and check if the connected "iPhone" or "iPod touch" is Application Link compatible.


Result
Result Proceed to
The connected "iPhone" or "iPod touch" is Application Link compatible A
The connected "iPhone" or "iPod touch" is not Application Link compatible B


A

6.CHECK APPLICATION

B

CONNECT APPLICATION LINK COMPATIBLE "iPhone" OR "iPod touch"

6.CHECK APPLICATION
a.

Check if an Application Link compatible application is installed on the connected "iPhone" or "iPod touch".

HINT:
·

Some applications require payment.

·

The names of applications are subject to change.



Result
Result Proceed to
An Application Link compatible application is installed A
An Application Link compatible application is not installed B

HINT:

Some applications have a display restriction in consideration of safe driving.




A

7.CHECK APPLICATION RUNNING STATUS

B

INSTALL APPLICATION LINK COMPATIBLE APPLICATION

7.CHECK APPLICATION RUNNING STATUS
a.

Connect the "iPhone" or "iPod touch" to the head unit using a dedicated cable, touch "Connected services" on the information screen of the radio and display receiver assembly with an Application Link compatible application running.

HINT:
·

Some applications require payment.

·

The names of applications are subject to change.




Result
Result Proceed to
The Application Link function can be used A
The Application Link function cannot be used B


A

END

B

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY