Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255487 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Application Link Function Sound cannot be Heard  


CAUTION / NOTICE / HINT

HINT:

When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


PROCEDURE

1.CHECK "iPhone" OR "iPod touch" SETTINGS
a.

Check the "iPhone" or "iPod touch" settings.

i.

Check that the volume is not set to "0".


ii.

Check that mute is off.


iii.

Check that silent mode is off.



b.

Check that the sound of the "iPhone" or "iPod touch" can be heard.

HINT:

Restarting the "iPhone" or "iPod touch" may return the application operation to normal.


OK:

Sound of the "iPhone" or "iPod touch" can be heard.




OK

2.CHECK USAGE CONDITION

NG

REPAIR OR REPLACE "iPhone" OR "iPod touch"

2.CHECK USAGE CONDITION
a.

Check the conditions under which the Application Link function is being used.

Result
Result Proceed to
Sounds cannot be heard after the engine switch is turned from off to on (IG) A
Sounds cannot be heard after the hands-free function is used
Sounds cannot be heard after another application is started on the "iPhone" or "iPod touch"
None of the above B



A

RESTART APPLICATION LINK COMPATIBLE APPLICATION

B

3.CHECK "iPhone" OR "iPod touch"
3.CHECK "iPhone" OR "iPod touch"
a.

Check if sounds can be heard from the "iPhone" or "iPod touch" when an Application Link compatible application is running and the "iPhone" or "iPod touch" is disconnected from the head unit.

Result
Result Proceed to
Sounds can be heard A
Sounds cannot be heard B

HINT:

Restarting the "iPhone" or "iPod touch" may return the application operation to normal.




A

4.CHECK APPLICATION RUNNING STATUS

B

RESTART APPLICATION LINK COMPATIBLE APPLICATION

4.CHECK APPLICATION RUNNING STATUS
a.

Connect the "iPhone" or "iPod touch" to the head unit using a dedicated cable, touch "Connected services" on the information screen of the radio and display receiver assembly with an Application Link compatible application running.

HINT:
·

The Application Link function may not start if a compatible application is not running.

·

If another application is running on the "iPhone" or "iPod touch", the Application Link compatible application is not running.



Result
Result Proceed to
Sounds can be heard A
Sounds cannot be heard B



A

END

B

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY