Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255487 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Cannot Connect to Center  


CAUTION / NOTICE / HINT

HINT:

When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).


PROCEDURE

1.CHECK SETTINGS
a.

Check the "iPhone", "iPod touch" or "MirrorLink" compatible smartphone settings.

Result
Result Proceed to
Data communication is enabled, a SIM card is inserted and reception is good A
Data communication is disabled B
A SIM card is not inserted (for "iPhone", "MirrorLink" compatible smartphone) C
Reception is poor or the smartphone is outside the service area D



A

2.CHECK APPLICATION

B

ENABLE DATA COMMUNICATION

C

INSERT SIM CARD

D

USE IN LOCATION WITH GOOD RECEPTION

2.CHECK APPLICATION
a.

Check if a Connected Services compatible application is installed on the connected "iPhone", "iPod touch" or "MirrorLink" compatible smartphone.

HINT:
·

Some applications require payment.

·

The names of applications are subject to change.



Result
Result Proceed to
A Connected Services compatible application is installed A
A Connected Services compatible application is not installed B



A

3.CHECK APPLICATION RUNNING STATUS

B

INSTALL CONNECTED SERVICES COMPATIBLE APPLICATION

3.CHECK APPLICATION RUNNING STATUS
a.

Connect the "iPhone" or "iPod touch" to the head unit using a dedicated cable, and touch "Connected services" on the information screen of the radio and display receiver assembly with a Connected Services compatible application running.

HINT:
·

The Connected Services function may not start if the application is not running.

·

The Connected Services function may not start if the application is not running.



Result
Result Proceed to
The "iPhone", "iPod touch" or "MirrorLink" compatible smartphone can be operated A
The "iPhone", "iPod touch" or "MirrorLink" compatible smartphone cannot be operated B



A

END

B

4.CHECK NO. 1 STEREO JACK ADAPTER ASSEMBLY
4.CHECK NO. 1 STEREO JACK ADAPTER ASSEMBLY
a.

Replace the No. 1 stereo jack adapter assembly (See page Audio / Visual / Telematics>AUDIO / VIDEO>STEREO JACK ADAPTER ASSEMBLY>REMOVAL).

OK:

The "iPhone", "iPod touch" or "MirrorLink" compatible smartphone can be operated.


Result
Result Proceed to
OK A
NG (for "MirrorLink" compatible smartphone) B
NG (for "iPhone", "iPod touch") C



A

END

B

5.CHECK "Bluetooth" CONNECTION

C

6.CHECK PRODUCT INFORMATION (OPERATION CHECK)
5.CHECK "Bluetooth" CONNECTION
a.

Check that the head unit and "MirrorLink" compatible smartphone can be connected using "Bluetooth".

Result
Result Proceed to
Can be connected using "Bluetooth" A
Cannot be connected using "Bluetooth" B



A

6.CHECK PRODUCT INFORMATION (OPERATION CHECK)

B

GO TO "Bluetooth" COMPATIBLE CELLULAR PHONE CANNOT BE CONNECTED" IN PROBLEMSYMPTOMS TABLE

6.CHECK PRODUCT INFORMATION (OPERATION CHECK)
a.

Contact the on-site operator and register the user (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>PRECAUTION).

OK:

The "iPhone", "iPod touch" or "MirrorLink" compatible smartphone can be operated.




OK

END

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY