Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052829 NAVIGATION / MULTI INFO DISPLAY _0255494 NAVIGATION SYSTEM U

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  TERMINALS OF ECU  


MULTI-MEDIA MODULE RECEIVER ASSEMBLY


U166267E02
2.354,1.646 2.646,1.823 0.292,0.177 10 false F77 1.646,3.01 1.938,3.188 0.292,0.177 10 false F84 2.354,3.01 2.646,3.188 0.292,0.177 10 false F86 4.823,1.917 5.115,2.094 0.292,0.177 10 false F78 5.531,2.917 5.792,3.094 0.26,0.177 10 false GA 5.646,1.542 5.906,1.719 0.26,0.177 10 false RA 3.573,3.177 3.833,3.354 0.26,0.177 10 false F82

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F77-1 (CANH) B CAN communication signal - -
F77-2 (CANL) W CAN communication signal - -
F77-7 (TX1+) W AVC-LAN communication signal - -
F77-8 (TX1-) L AVC-LAN communication signal - -
F77-10 (VMTF) - F77-12 (GND1) V - W-B Visual mute signal When image on display switches 3.5 V or higher → Below 1 V → 3.5 V or higher
F77-12 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω
F77-13 (ILL-) - F77-12 (GND1) W - W-B Illumination signal Engine switch on (IG), light control switch off → tail or head position Below 1 V → Pulse generation
F77-14 (ILL+) - F77-12 (GND1) G - W-B Illumination signal Engine switch on (IG), light control switch off → tail or head position Below 1 V → 11 to 14 V
F77-15 (IG) - F77-12 (GND1) G - W-B Power source (IG) Engine switch on (IG) 11 to 14 V
Engine switch off Below 1 V
F77-16 (ACC1) - F77-12 (GND1) GR - W-B Power source (ACC) Engine switch on (ACC) 11 to 14 V
Engine switch off Below 1 V
F77-17 (+B1) - F77-12 (GND1) R - W-B Power source Always 11 to 14 V
F77-18 (V+) - F77-19 (V-) R - W Rear television camera image signal Engine switch on (IG), reverse (R) selected, camera lens is not covered, displaying an image Pulse generation (Refer to waveform 2)
Engine switch on (IG), reverse (R) selected, camera lens is covered, blacking out screen Pulse generation (Refer to waveform 3)
F77-19 (V-) - F77-12 (GND1) W - W-B Ground Always Below 1 V
F77-27 (MIN+) - F77-12 (GND1) B - W-B Microphone voice signal See "Microphone & Voice Recognition Check" in Operation Check (See page (Click here)) -
F77-28 (SGND) - F77-12 (GND1) Shield - W-B Shield ground Always Below 1 V
F77-29 (MACC) - F77-12 (GND1) W - W-B Telephone microphone assembly power supply Engine switch off Below 1 V
Engine switch on (ACC) 4 to 6 V
F77-30 (SW1) - F77-32 (SWG) L - W Steering pad switch signal Steering pad switch not operated 4.44 to 5.43 V
Seek+ switch pushed 0.45 to 0.65 V
Seek- switch pushed 1.19 to 1.49 V
Vol+ switch pushed 2.09 to 2.54 V
Vol- switch pushed 3.2 to 3.88 V
F77-31 (SW2) - F77-32 (SWG) P - W Steering pad switch signal Steering pad switch not operated 4.44 to 5.43 V
MODE switch pushed 0.45 to 0.65 V
On hook switch pushed 1.19 to 1.49 V
Off hook switch pushed 2.09 to 2.54 V
Voice switch pushed 3.2 to 3.88 V
F77-32 (SWG) - Body ground W - Body ground Steering pad switch signal Always Below 1 V
F77-35 (UIND) R UART communication signal - -
F77-36 (UPSW) P UART communication signal - -
F77-39 (CA+) - F77-12 (GND1) B - W-B Television camera power supply Engine switch on (IG), reverse (R) selected 5.5 to 7.05 V
F77-40 (CGND) - Body ground Shield - Body ground Shield ground Always Below 1 V
F77-45 (TX3+) B AVC-LAN communication signal - -
F77-46 (TX3-) W AVC-LAN communication signal - -
F77-48 (MIN-) - Body ground R - Body ground Microphone voice signal See "Microphone & Voice Recognition Check" in Operation Check (See page (Click here)) -
F77-49 (SNS2) - F77-12 (GND1) GR - W-B Microphone connection detection signal Always Below 1 V
F77-55 (PKB) - F77-12 (GND1) Y - W-B Parking brake switch signal See "Vehicle Signal Check Mode" in Operation Check (See page (Click here)) -
F77-56 (SPD) - F77-12 (GND1) V - W-B Speed signal from combination meter assembly See "Vehicle Signal Check Mode" in Operation Check (See page (Click here)) -
F77-57 (REV) - F77-12 (GND1) L - W-B Receiver signal See "Vehicle Signal Check Mode" in Operation Check (See page (Click here)) -
F84-1 (WUO) - F77-12 (GND1) W - W-B MOST communication signal Engine switch on (ACC) 4.5 V or higher
Engine switch off Below 1 V
F84-2 (MI+) B MOST communication signal - -
F84-3 (MI-) B MOST communication signal - -
F84-4 (SLDI) - F77-12 (GND1) Shield - W-B Shield ground Always Below 1 V
F84-5 (MO+) B MOST communication signal - -
F84-6 (MO-) B MOST communication signal - -
F84-7 (SLDO) - F77-12 (GND1) Shield - W-B Shield ground Always Below 1 V
F86-1 (USV1) # Power source - -
F86-2 (US1-) # Data signal - -
F86-3 (US1+) # Data signal - -
F86-4 (UGD1) # Ground - -
F86-5 (UESS) Shield Shield ground - -
F78-1 (NTSO) - F77-12 (GND1)*2 B - W-B Display signal RSE playing A waveform synchronized with sound is output.
F78-2 (NTSG) - F77-12 (GND1)*2 W - W-B Display signal ground Always Below 1 V
F78-3 (SLD2) - F77-12 (GND1)*2 Shield - W-B Shield ground Always Below 1 V
F78-4 (VMTR) - F77-12 (GND1)*2 G - W-B Mute signal RSE playing → Source chanyed 4 V or higher → Below 0.7 V → 4 V or higher
F78-5 (AGND) - F77-12 (GND1) Shield - Body ground Shield ground Always Below 1 V
F78-6 (VV+) - F77-12 (GND1)*2 B - W-B Display signal DVD is playing A waveform synchronized with display signal is output. (Refer to waveform 1)
F78-7 (VAR+) - F78-15 (VA-) W - R Sound signal (Right)

AUX audio device playing (When stereo jack adapter used)*1

Rear audio device playing (When headphone terminal used)*2


A waveform synchronized with sound is output.
F78-8 (VAL+) - F78-15 (VA-) B - R Sound signal (Left)

AUX audio device playing (When stereo jack adapter used)*1

Rear audio device playing (When headphone terminal used)*2


A waveform synchronized with sound is output.
F78-13 (SG) - Body ground*2 Shield - Body ground Shield ground Always Below 1 V
F78-14 (VV-) - F77-12 (GND1)*2 W - W-B Ground Always Below 1 V
F78-15 (VA-) - F77-12 (GND1) R - W-B Sound signal ground Always Below 1 V
F78-16 (ADPG) - F77-12 (GND1) R - W-B External device connector detection signal External device connected Below 1 V
External device not connected 2.1 to 3 V

*1: w/o Rear Seat Entertainment System

*2: w/ Rear Seat Entertainment System


a.
E181025E42
0.143,1.47 0.478,1.631 0.335,0.162 10 GND 0.664,2.65 0.814,2.811 0.150,0.162 10 *a 1.503,2.65 1.653,2.811 0.150,0.162 10 *b 1.072,2.145 0.829,2.65 false 1.198,2.015 1.571,2.65 false

Reference (Oscilloscope waveform):

i.

Waveform 1

Item Content
Measurement Terminal F78-6 (VV+) - F77-12 (GND1)
Measurement Setting 200 mV/DIV., 10 μs/DIV.
Condition DVD is playing

HINT:

The video waveform changes according to the image input from the multi-media module receiver assembly to the multi-display assembly, but the synchronization signal does not change.


Text in Illustration
*a Synchronization Signal
*b Video Waveform



b.

Reference (Oscilloscope waveform):

E349094E01
1,2.25 1.125,2.25 1.125,2.25 1.188,1.792 false 1.51,2.229 1.385,2.229 1.385,2.229 1.302,1.688 false 4.74,2.229 4.865,2.229 4.865,2.229 4.948,1.625 false 5.333,2.208 5.177,2.208 5.177,2.208 5.083,1.552 false 4.073,0.229 4.385,0.427 0.313,0.198 10 false *b 0.448,0.229 0.76,0.427 0.313,0.198 10 false *a 0.406,1.24 0.813,1.458 0.406,0.219 10 false GND 4.156,1.229 4.563,1.448 0.406,0.219 10 false GND 0.802,2.146 1.115,2.344 0.313,0.198 10 false *c 1.563,2.156 1.875,2.354 0.313,0.198 10 false *d 4.552,2.135 4.865,2.333 0.313,0.198 10 false *c 5.375,2.125 5.688,2.323 0.313,0.198 10 false *d

i.

Waveform 2 (camera lens is not covered, displaying an image)

Item Content
Measurement terminal F77-18 (V+) - F77-19 (V-)
Measurement setting 200 mV/DIV., 50 μs/DIV.
Condition Engine switch on (IG), reverse (R) selected, camera lens is not covered, displaying an image

HINT:

The video waveform changes according to the image from the rear television camera assembly.



ii.

Waveform 3 (camera lens is covered, blacking out the screen)

Item Content
Measurement terminal F77-18 (V+) - F77-19 (V-)
Measurement setting 200 mV/DIV., 50 μs/DIV.
Condition Engine switch on (IG), reverse (R) selected, camera lens is covered, blacking out screen

HINT:

The video waveform changes according to the image from the rear television camera assembly.





Text in Illustration
*a Waveform 1 (camera lens is not covered, displaying an image)
*b Waveform 2 (camera lens is covered, blacking out the screen)
*c Synchronization Signal
*d Video Waveform

MULTI-DISPLAY ASSEMBLY


U166253E02
3.644,0 3.936,0.166 0.292,0.166 10 F79 5.819,0 6.121,0.166 0.302,0.166 10 F83 6.625,0 6.927,0.166 0.302,0.166 10 F80

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F79-2 (ILL) - F79-13 (GND1) G - BR Illumination signal Engine switch on (IG), light control switch off → tail or head position Below 1 V → 11 to 14 V
F79-3 (UPSW) P UART communication signal - -
F79-4 (UIND) R UART communication signal - -
F79-7 (TX+) B AVC-LAN communication signal - -
F79-11 (VMTI) - F79-13 (GND1) V - BR Visual mute signal When image on display switches 3.5 V or higher → Below 1 V → 3.5 V or higher
F79-12 (+B2) - F79-13 (GND1) R - BR Power source Always 11 to 14 V
F79-13 (GND1) - Body ground BR - Body ground Ground Always Below 1 Ω
F79-14 (ILL-) - F79-13 (GND1) W - BR Illumination signal Engine switch on (IG), light control switch off → tail or head position Below 1 V → Pulse generation
F79-19 (TX-) W AVC-LAN communication signal - -
F79-23 (IG) - F79-13 (GND1) G - BR Power source (IG) Engine switch on (IG) 11 to 14 V
Engine switch off Below 1 V
F79-24 (ACC) - F79-13 (GND1) GR - BR Power source (ACC) Engine switch on (ACC) 11 to 14 V
Engine switch off Below 1 V