These DTCs are stored when a malfunction occurs in the CAN communication circuit.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0073 | CAN bus connection error | CAN communication system |
| U0100 | CAN reception error | |
| U0126 | CAN reception error | |
| U0140 | CAN reception error | |
| U0155 | CAN reception error | |
| U1110 | CAN reception error |
Clear the DTCs (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).
NEXT
Recheck for DTCs and check if the same DTCs are output again.
| Result | Proceed to |
|---|---|
| No DTCs are output | A |
| DTCs are output (for LHD) | B |
| DTCs are output (for RHD) | C |
A
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
B
C