Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255497 TOYOTA PARKING ASSIST-SENSOR SYSTEM U

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  TERMINALS OF ECU  


CHECK CLEARANCE WARNING ECU ASSEMBLY


U166219E02
3.458,0.208 3.719,0.385 0.26,0.177 10 false F92

a.

Disconnect the F92 clearance warning ECU assembly connector.


b.

Measure the voltage and resistance according to value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F92-9 (CLSW) - F92-17 (E) W - BR Back sonar or clearance sonar switch power source signal Engine switch on (IG), back sonar or clearance sonar switch assembly on 11 to 14 V
Engine switch on (IG), back sonar or clearance sonar switch assembly off Below 1 V
F92-1 (IG) - F92-30 (E) B - BR IG power source signal Engine switch on (IG) 11 to 14 V
Engine switch off Below 1 V
F92-30 (E) - Body ground BR - Body ground ECU ground Always Below 1 Ω


c.

Reconnect the F92 clearance warning ECU assembly connector.


d.

Measure the voltage and waveform according to value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F92-22 (BOR) - F92-23 (E1) R - GR Rear ultrasonic sensor circuit power source Engine switch off Below 1 V
Engine switch on (IG), back sonar or clearance sonar switch assembly on 7.2 to 8.8 V
F92-8 (SOF) - F92-6 (E5) LG - R No. 1 ultrasonic sensor communication signal Engine switch on (IG), back sonar or clearance sonar switch assembly on Waveform 1
F92-14 (CBZ) - F92-13 (EF) G - L No. 1 clearance warning buzzer signal Buzzer not sounding Below 1 V
Buzzer sounding Waveform 2
F92-4 (BOF) - F92-6 (E5) GR - R No. 1 ultrasonic sensor circuit power source Engine switch on (IG), back sonar or clearance sonar switch assembly on 7.2 to 8.8 V
Engine switch off Below 1 V
F92-24 (SOR) - F92-23 (E1) LG - GR Rear ultrasonic sensor communication signal Engine switch on (IG), back sonar or clearance sonar switch assembly on Waveform 3


e.
E235241E06
0.125,0.948 0.49,1.156 0.365,0.208 10 false GND

Using an oscilloscope, check waveform 1.

Waveform 1 (Reference)
Item Content
Terminal No. (Symbol) F92-8 (SOF) - F92-6 (E5)
Tool Setting 2 V/DIV., 1 msec./DIV.
Condition Engine switch on (IG), back sonar or clearance sonar switch assembly on


f.
E227014E02
0.083,1.677 0.552,1.938 0.469,0.26 10 GND

Using an oscilloscope, check waveform 2.

Waveform 2 (Reference)
Item Content
Terminal No. (Symbol) F92-10 (BBZ) - F92-11 (EF)
Tool Setting 5 V/DIV., 1 msec./DIV.
Condition Buzzer sounding

NOTICE:

The waveform amplitude varies depending on the volume setting.



g.
E235241E02
0.104,0.923 0.454,1.066 0.35,0.143 10 GND

Using an oscilloscope, check waveform 3.

Waveform 1 (Reference)
Item Content
Terminal No. (Symbol) F92-24 (SOR) - F92-23 (E1)
Tool Setting 5 V/DIV., 1 ms./DIV.
Condition Engine switch on (IG), back sonar or clearance sonar switch assembly on