Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052831 PARK ASSIST / MONITORING _0255497 TOYOTA PARKING ASSIST-SENSOR SYSTEM D

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Connect the intelligent tester to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the intelligent tester on.


d.

Enter the following menus: Customize Setting /


e.

Select the setting by referring to the table below.

Warning
Display Default Contents Setting
Rr Sensor Onset Range Wide Sets the buzzer activation range for the rear sensors. Narrow or Wide
Keep Sense Buzzer Avail Makes the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds. Not Avail or Avail
Fr & Rr Buzzer Volume H Changes the buzzer volume setting. L, M1, M2, M3 or H

Sensor
Display Default Contents Setting
Sensor Condition N Avail Makes the sensors available when the shift lever is in N. Not Avail or Avail
Front Side Dist Sensor Long Sets the buzzer activation range for the front sensors. Short or Long
Reverse Range Front Sensor Fsde Changes the operation setting for the vehicle front sensors when the shift lever is in R. F, Fs,Fc, Fsde or F Stop
Non P/R Range Rear Sensor R Stop Changes the operation setting for the vehicle rear sensors when the shift lever is not in P or R. R, Rcrn or R Stop

Display
Display Default Contents Setting
Approach Display OFF Avail The display when moving away from a previously detected obstacle. Not Avail or Avail
Display Mode All The display mode setting (when the intuitive parking assist system is normal). All or Undisp



CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Turn the engine switch on (IG).


b.

Enter the following menus: Setup / Vehicle / TOYOTA park assist.


c.

Select the setting by referring to the table below.

Warning
Display Default Contents Setting
Alert volume 3 Sets the buzzer activation range for the rear center sensors. 1, 2, 3, 4 or 5
Display On The display mode setting (when the TOYOTA parking assist-sensor system is normal). On or Off
Distance Wide Sets the buzzer activation range for the rear center sensors. Narrow or Wide